This chip appears to be register-compatible with the LIS2DH. The new description is a copy of the LIS2DH's description with a different WAI value. Datasheet: http://linux-chenxing.org/silan/SC7A20-SilanMicroelectronics.pdf Datasheet: http://www.siitek.com.cn/Upfiles/down/SC7A20说明书_0.92(智能穿戴).pdf Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx> --- Changes in v2: - Add a comment about the WAI value - Update commit messages drivers/iio/accel/st_accel.h | 2 + drivers/iio/accel/st_accel_core.c | 83 +++++++++++++++++++++++++++++++ drivers/iio/accel/st_accel_i2c.c | 5 ++ 3 files changed, 90 insertions(+) diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h index 8750dea56fcb..00e056c21bfc 100644 --- a/drivers/iio/accel/st_accel.h +++ b/drivers/iio/accel/st_accel.h @@ -36,6 +36,7 @@ enum st_accel_type { LIS3DHH, LIS2DE12, LIS2HH12, + SC7A20, ST_ACCEL_MAX, }; @@ -61,6 +62,7 @@ enum st_accel_type { #define LIS3DE_ACCEL_DEV_NAME "lis3de" #define LIS2DE12_ACCEL_DEV_NAME "lis2de12" #define LIS2HH12_ACCEL_DEV_NAME "lis2hh12" +#define SC7A20_ACCEL_DEV_NAME "sc7a20" #ifdef CONFIG_IIO_BUFFER int st_accel_allocate_ring(struct iio_dev *indio_dev); diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index 31ea19d0ba71..2ada8d6fb503 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -1087,6 +1087,89 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .multi_read_bit = true, .bootime = 2, }, + { + /* + * Not an ST part. Register-compatible with the LIS2DH, even + * though the WAI value is different. + */ + .wai = 0x11, + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, + .sensors_supported = { + [0] = SC7A20_ACCEL_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_accel_12bit_channels, + .odr = { + .addr = 0x20, + .mask = 0xf0, + .odr_avl = { + { .hz = 1, .value = 0x01, }, + { .hz = 10, .value = 0x02, }, + { .hz = 25, .value = 0x03, }, + { .hz = 50, .value = 0x04, }, + { .hz = 100, .value = 0x05, }, + { .hz = 200, .value = 0x06, }, + { .hz = 400, .value = 0x07, }, + { .hz = 1600, .value = 0x08, }, + }, + }, + .pw = { + .addr = 0x20, + .mask = 0xf0, + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, + }, + .enable_axis = { + .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, + .mask = ST_SENSORS_DEFAULT_AXIS_MASK, + }, + .fs = { + .addr = 0x23, + .mask = 0x30, + .fs_avl = { + [0] = { + .num = ST_ACCEL_FS_AVL_2G, + .value = 0x00, + .gain = IIO_G_TO_M_S_2(1000), + }, + [1] = { + .num = ST_ACCEL_FS_AVL_4G, + .value = 0x01, + .gain = IIO_G_TO_M_S_2(2000), + }, + [2] = { + .num = ST_ACCEL_FS_AVL_8G, + .value = 0x02, + .gain = IIO_G_TO_M_S_2(4000), + }, + [3] = { + .num = ST_ACCEL_FS_AVL_16G, + .value = 0x03, + .gain = IIO_G_TO_M_S_2(12000), + }, + }, + }, + .bdu = { + .addr = 0x23, + .mask = 0x80, + }, + .drdy_irq = { + .int1 = { + .addr = 0x22, + .mask = 0x10, + }, + .addr_ihl = 0x25, + .mask_ihl = 0x02, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, + }, + .sim = { + .addr = 0x23, + .value = BIT(0), + }, + .multi_read_bit = true, + .bootime = 2, + }, }; /* Default accel DRDY is available on INT1 pin */ diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c index c0ce78eebad9..7f5888570e87 100644 --- a/drivers/iio/accel/st_accel_i2c.c +++ b/drivers/iio/accel/st_accel_i2c.c @@ -107,6 +107,10 @@ static const struct of_device_id st_accel_of_match[] = { .compatible = "st,lis2hh12", .data = LIS2HH12_ACCEL_DEV_NAME, }, + { + .compatible = "silan,sc7a20", + .data = SC7A20_ACCEL_DEV_NAME, + }, {}, }; MODULE_DEVICE_TABLE(of, st_accel_of_match); @@ -142,6 +146,7 @@ static const struct i2c_device_id st_accel_id_table[] = { { LIS3DE_ACCEL_DEV_NAME }, { LIS2DE12_ACCEL_DEV_NAME }, { LIS2HH12_ACCEL_DEV_NAME }, + { SC7A20_ACCEL_DEV_NAME }, {}, }; MODULE_DEVICE_TABLE(i2c, st_accel_id_table); -- 2.33.1
