I believe that the PCIe clkreq pin is an output. That means we
shouldn't have a pull enabled for it. Turn it off.
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
Changes in v3:
- ("sc7280-idp: Disable pull from pcie1_clkreq") new for v3.
arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts | 2 +-
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
index 82c3c8f0342b..3c5aab225748 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
@@ -827,7 +827,7 @@ &usb_2_hsphy {
/* PINCTRL - additions to nodes defined in sc7280.dtsi */
&pcie1_clkreq_n {
- bias-pull-up;
+ bias-disable;
drive-strength = <2>;
};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 6e20e8c07402..9140dca3b72a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -367,7 +367,7 @@ key_vol_up_default: key-vol-up-default {
};
&pcie1_clkreq_n {
- bias-pull-up;
+ bias-disable;
drive-strength = <2>;
};
--
2.35.0.rc2.247.g8bbb082509-goog
