Pullups and drive strength don't belong in the SoC dtsi file. Move to
the board file.
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
Changes in v3:
- ("Move pcie1_clkreq pull / drive str to boards") new for v3.
arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts | 5 +++++
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 5 +++++
arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 --
3 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
index 918352c097bc..82c3c8f0342b 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
@@ -826,6 +826,11 @@ &usb_2_hsphy {
/* PINCTRL - additions to nodes defined in sc7280.dtsi */
+&pcie1_clkreq_n {
+ bias-pull-up;
+ drive-strength = <2>;
+};
+
&qspi_cs0 {
bias-disable;
};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 23e656e51904..6e20e8c07402 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -366,6 +366,11 @@ key_vol_up_default: key-vol-up-default {
};
};
+&pcie1_clkreq_n {
+ bias-pull-up;
+ drive-strength = <2>;
+};
+
&qspi_cs0 {
bias-disable;
};
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 3f9837921c17..a2e3aa6ecdd3 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3293,8 +3293,6 @@ edp_hot_plug_det: edp-hot-plug-det {
pcie1_clkreq_n: pcie1-clkreq-n {
pins = "gpio79";
function = "pcie1_clkreqn";
- drive-strength = <2>;
- bias-pull-up;
};
qspi_clk: qspi-clk {
--
2.35.0.rc2.247.g8bbb082509-goog
