The watchdog timer is always usable, regardless of board design, so
there is no point in marking the watchdog device as disabled-by-default
in nuvoton-wpcm450.dtsi.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
---
arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts | 4 ----
arch/arm/boot/dts/nuvoton-wpcm450.dtsi | 1 -
2 files changed, 5 deletions(-)
diff --git a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
index 3ee61251a16d0..1ae7ae4804275 100644
--- a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
+++ b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
@@ -77,7 +77,3 @@ &serial1 {
/* "Serial over LAN" port. Connected to ttyS2 of the host system. */
status = "okay";
};
-
-&watchdog0 {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
index 93595850a4c3c..b9b669cd632f1 100644
--- a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
+++ b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
@@ -81,7 +81,6 @@ watchdog0: watchdog@b800101c {
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb800101c 0x4>;
clocks = <&clk24m>;
- status = "disabled";
};
aic: interrupt-controller@b8002000 {
--
2.34.1
