The NXP TDA998x HDMI transmitter may transmit audio to the HDMI link from 2 different sources, I2S and S/PDIF. This patch set adds a generic HDMI CODEC module which is used by the TDA998x driver to update the audio constraints from the display characteristics (EDID) and by the audio subsystem to connect the chosen audio source to the HDMI link. v4: - remove all the TDA998x specific stuff from the CODEC - move the EDID scan from the CODEC to the TDA998x - move the CODEC to sound/soc (Mark Brown) - update the audio_sample_rate from the EDID (Andrew Jackson) v3: fix bad rate (Andrew Jackson) v2: check double stream start (Mark Brown) Jean-Francois Moine (2): ASoC:codecs: Add a generic HDMI audio CODEC drm/i2c:tda998x: Use the HDMI2 audio CODEC Documentation/devicetree/bindings/sound/hdmi2.txt | 32 ++++ drivers/gpu/drm/i2c/Kconfig | 1 + drivers/gpu/drm/i2c/tda998x_drv.c | 142 ++++++++++++++- include/sound/hdmi2.h | 24 +++ sound/soc/codecs/Kconfig | 3 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/hdmi2.c | 204 ++++++++++++++++++++++ 7 files changed, 400 insertions(+), 8 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/hdmi2.txt create mode 100644 include/sound/hdmi2.h create mode 100644 sound/soc/codecs/hdmi2.c -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
