Now that we have proper support to use the generic phase API in our clock
driver, switch the MMC driver to use it.
Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Acked-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
---
.../devicetree/bindings/mmc/sunxi-mmc.txt | 8 +--
drivers/mmc/host/sunxi-mmc.c | 72 +++++++++++++++-------
2 files changed, 53 insertions(+), 27 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
index 91b3a3467150..4bf41d833804 100644
--- a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
@@ -10,8 +10,8 @@ Absolute maximum transfer rate is 200MB/s
Required properties:
- compatible : "allwinner,sun4i-a10-mmc" or "allwinner,sun5i-a13-mmc"
- reg : mmc controller base registers
- - clocks : a list with 2 phandle + clock specifier pairs
- - clock-names : must contain "ahb" and "mmc"
+ - clocks : a list with 4 phandle + clock specifier pairs
+ - clock-names : must contain "ahb", "mmc", "output" and "sample"
- interrupts : mmc controller interrupt
Optional properties:
@@ -25,8 +25,8 @@ Examples:
mmc0: mmc@01c0f000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c0f000 0x1000>;
- clocks = <&ahb_gates 8>, <&mmc0_clk>;
- clock-names = "ahb", "mod";
+ clocks = <&ahb_gates 8>, <&mmc0_clk>, <&mmc0_output_clk>, <&mmc0_sample_clk>;
+ clock-names = "ahb", "mod", "output", "sample";
interrupts = <0 32 4>;
status = "disabled";
};
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index 024f67c98cdc..8719cefa590d 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -22,7 +22,6 @@
#include <linux/clk.h>
#include <linux/clk-private.h>
-#include <linux/clk/sunxi.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
@@ -230,6 +229,8 @@ struct sunxi_mmc_host {
/* clock management */
struct clk *clk_ahb;
struct clk *clk_mmc;
+ struct clk *clk_sample;
+ struct clk *clk_output;
/* irq */
spinlock_t lock;
@@ -617,7 +618,7 @@ static int sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en)
static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host,
struct mmc_ios *ios)
{
- u32 rate, oclk_dly, rval, sclk_dly, src_clk;
+ u32 rate, oclk_dly, rval, sclk_dly;
int ret;
rate = clk_round_rate(host->clk_mmc, ios->clock);
@@ -643,34 +644,31 @@ static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host,
/* determine delays */
if (rate <= 400000) {
- oclk_dly = 0;
- sclk_dly = 7;
+ oclk_dly = 180;
+ sclk_dly = 42;
} else if (rate <= 25000000) {
- oclk_dly = 0;
- sclk_dly = 5;
+ oclk_dly = 180;
+ sclk_dly = 75;
} else if (rate <= 50000000) {
if (ios->timing == MMC_TIMING_UHS_DDR50) {
- oclk_dly = 2;
- sclk_dly = 4;
+ oclk_dly = 60;
+ sclk_dly = 120;
} else {
- oclk_dly = 3;
- sclk_dly = 5;
+ oclk_dly = 90;
+ sclk_dly = 150;
}
+ } else if (rate <= 100000000) {
+ oclk_dly = 6;
+ sclk_dly = 24;
+ } else if (rate <= 200000000) {
+ oclk_dly = 3;
+ sclk_dly = 12;
} else {
- /* rate > 50000000 */
- oclk_dly = 2;
- sclk_dly = 4;
+ return -EINVAL;
}
- src_clk = clk_get_rate(clk_get_parent(host->clk_mmc));
- if (src_clk >= 300000000 && src_clk <= 400000000) {
- if (oclk_dly)
- oclk_dly--;
- if (sclk_dly)
- sclk_dly--;
- }
-
- clk_sunxi_mmc_phase_control(host->clk_mmc, sclk_dly, oclk_dly);
+ clk_set_phase(host->clk_sample, sclk_dly);
+ clk_set_phase(host->clk_output, oclk_dly);
return sunxi_mmc_oclk_onoff(host, 1);
}
@@ -909,6 +907,18 @@ static int sunxi_mmc_resource_request(struct sunxi_mmc_host *host,
return PTR_ERR(host->clk_mmc);
}
+ host->clk_output = devm_clk_get(&pdev->dev, "output");
+ if (IS_ERR(host->clk_output)) {
+ dev_err(&pdev->dev, "Could not get output clock\n");
+ return PTR_ERR(host->clk_output);
+ }
+
+ host->clk_sample = devm_clk_get(&pdev->dev, "sample");
+ if (IS_ERR(host->clk_sample)) {
+ dev_err(&pdev->dev, "Could not get sample clock\n");
+ return PTR_ERR(host->clk_sample);
+ }
+
host->reset = devm_reset_control_get(&pdev->dev, "ahb");
ret = clk_prepare_enable(host->clk_ahb);
@@ -923,11 +933,23 @@ static int sunxi_mmc_resource_request(struct sunxi_mmc_host *host,
goto error_disable_clk_ahb;
}
+ ret = clk_prepare_enable(host->clk_output);
+ if (ret) {
+ dev_err(&pdev->dev, "Enable output clk err %d\n", ret);
+ goto error_disable_clk_mmc;
+ }
+
+ ret = clk_prepare_enable(host->clk_sample);
+ if (ret) {
+ dev_err(&pdev->dev, "Enable sample clk err %d\n", ret);
+ goto error_disable_clk_output;
+ }
+
if (!IS_ERR(host->reset)) {
ret = reset_control_deassert(host->reset);
if (ret) {
dev_err(&pdev->dev, "reset err %d\n", ret);
- goto error_disable_clk_mmc;
+ goto error_disable_clk_sample;
}
}
@@ -946,6 +968,10 @@ static int sunxi_mmc_resource_request(struct sunxi_mmc_host *host,
error_assert_reset:
if (!IS_ERR(host->reset))
reset_control_assert(host->reset);
+error_disable_clk_sample:
+ clk_disable_unprepare(host->clk_sample);
+error_disable_clk_output:
+ clk_disable_unprepare(host->clk_output);
error_disable_clk_mmc:
clk_disable_unprepare(host->clk_mmc);
error_disable_clk_ahb:
--
2.0.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
