Re: [PATCH v11 2/3] dts: arm64: mt8183: add Mediatek MDP3 nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2022-01-21 at 12:58 +0100, AngeloGioacchino Del Regno wrote:
> Il 05/01/22 10:37, Moudy Ho ha scritto:
> > Add device nodes for Media Data Path 3 (MDP3) modules.
> > 
> > Signed-off-by: Moudy Ho <moudy.ho@xxxxxxxxxxxx>
> > ---
> >   arch/arm64/boot/dts/mediatek/mt8183.dtsi | 108
> > ++++++++++++++++++++++-
> >   1 file changed, 107 insertions(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > index ba4584faca5a..b872ef1ff6b3 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > @@ -1325,6 +1325,79 @@
> >   			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX
> > 0 0x1000>;
> >   		};
> >   
> > +		mdp3_rdma0: mdp3_rdma0@14001000 {
> > +			compatible = "mediatek,mt8183-mdp3",
> > +				     "mediatek,mt8183-mdp3-rdma0";
> > +			mediatek,scp = <&scp>;
> > +			mediatek,mdp3-comps = "mediatek,mt8183-mdp3-
> > dl1",
> > +					      "mediatek,mt8183-mdp3-
> > dl2",
> > +					      "mediatek,mt8183-mdp3-
> > path1",
> > +					      "mediatek,mt8183-mdp3-
> > path2",
> > +					      "mediatek,mt8183-mdp3-
> > imgi",
> > +					      "mediatek,mt8183-mdp3-
> > exto";
> > +			reg = <0 0x14001000 0 0x1000>,
> > +			      <0 0x14000000 0 0x1000>,
> > +			      <0 0x14005000 0 0x1000>,
> > +			      <0 0x14006000 0 0x1000>,
> > +			      <0 0x15020000 0 0x1000>;
> > +			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX
> > 0x1000 0x1000>,
> > +						  <&gce SUBSYS_1400XXXX
> > 0 0x1000>,
> > +						  <&gce SUBSYS_1400XXXX
> > 0x5000 0x1000>,
> > +						  <&gce SUBSYS_1400XXXX
> > 0x6000 0x1000>,
> > +						  <&gce SUBSYS_1502XXXX
> > 0 0x1000>;
> > +			power-domains = <&spm
> > MT8183_POWER_DOMAIN_DISP>;
> > +			clocks = <&mmsys CLK_MM_MDP_RDMA0>,
> > +				 <&mmsys CLK_MM_MDP_RSZ1>,
> > +				 <&mmsys CLK_MM_MDP_DL_TXCK>,
> > +				 <&mmsys CLK_MM_MDP_DL_RX>,
> > +				 <&mmsys CLK_MM_IPU_DL_TXCK>,
> > +				 <&mmsys CLK_MM_IPU_DL_RX>;
> > +			iommus = <&iommu M4U_PORT_MDP_RDMA0>;
> > +			mediatek,mmsys = <&mmsys>;
> > +			mediatek,mm-mutex = <&mutex>;
> > +			mediatek,mailbox-gce = <&gce>;
> > +			mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>,
> > +				 <&gce 21 CMDQ_THR_PRIO_LOWEST>,
> > +				 <&gce 22 CMDQ_THR_PRIO_LOWEST>,
> > +				 <&gce 23 CMDQ_THR_PRIO_LOWEST>;
> 
> Hello Moudy,
> the mboxes for gce 21, 22, 23 are missing the third cell. Please fix.
> 
> Regards,
> Angelo

Hi Angelo,
Thanks for the reminder, but I'm a bit confused, the previous
version(v10) mentioned that the current upstream mbox has only 2
cells.
So I should follow this rule to remove the extra 0 in the first item as
follows:
 +			mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>,
 +				 <&gce 21 CMDQ_THR_PRIO_LOWEST>,
 +				 <&gce 22 CMDQ_THR_PRIO_LOWEST>,
 +				 <&gce 23 CMDQ_THR_PRIO_LOWEST>;

Thanks,
Moudy Ho
> 
> > +			gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
> > +				     <&gce 0x14010000 SUBSYS_1401XXXX>,
> > +				     <&gce 0x14020000 SUBSYS_1402XXXX>,
> > +				     <&gce 0x15020000 SUBSYS_1502XXXX>;
> > +		};
> > +
> 
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux