Convert the Samsung SoC (S3C24xx, S3C64xx, S5Pv210, Exynos) SPI controller bindings to DT schema format. The conversion also drops requirement from providing controller-data and its data for each of SPI peripheral device nodes. The dtschema cannot express this and the requirement is being relaxed in the driver now. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx> Reviewed-by: Sam Protsenko <semen.protsenko@xxxxxxxxxx> Acked-by: Pratyush Yadav <p.yadav@xxxxxx> --- .../bindings/soc/samsung/exynos-usi.yaml | 2 +- .../spi/samsung,spi-peripheral-props.yaml | 33 ++++ .../devicetree/bindings/spi/samsung,spi.yaml | 187 ++++++++++++++++++ .../bindings/spi/spi-peripheral-props.yaml | 1 + .../devicetree/bindings/spi/spi-samsung.txt | 122 ------------ MAINTAINERS | 2 +- 6 files changed, 223 insertions(+), 124 deletions(-) create mode 100644 Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml create mode 100644 Documentation/devicetree/bindings/spi/samsung,spi.yaml delete mode 100644 Documentation/devicetree/bindings/spi/spi-samsung.txt diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml index 58f2e9d8bb0e..d10ec742a6a5 100644 --- a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml @@ -22,7 +22,7 @@ description: | [1] Documentation/devicetree/bindings/serial/samsung_uart.yaml [2] Documentation/devicetree/bindings/i2c/i2c-exynos5.txt - [3] Documentation/devicetree/bindings/spi/spi-samsung.txt + [3] Documentation/devicetree/bindings/spi/samsung,spi.yaml properties: $nodename: diff --git a/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml new file mode 100644 index 000000000000..f0db3fb3d688 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/samsung,spi-peripheral-props.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Peripheral-specific properties for Samsung S3C/S5P/Exynos SoC SPI controller + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx> + +description: + See spi-peripheral-props.yaml for more info. + +properties: + controller-data: + type: object + additionalProperties: false + + properties: + samsung,spi-feedback-delay: + description: | + The sampling phase shift to be applied on the miso line (to account + for any lag in the miso line). Valid values: + - 0: No phase shift. + - 1: 90 degree phase shift sampling. + - 2: 180 degree phase shift sampling. + - 3: 270 degree phase shift sampling. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/spi/samsung,spi.yaml b/Documentation/devicetree/bindings/spi/samsung,spi.yaml new file mode 100644 index 000000000000..61c77088e8ee --- /dev/null +++ b/Documentation/devicetree/bindings/spi/samsung,spi.yaml @@ -0,0 +1,187 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/samsung,spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S3C/S5P/Exynos SoC SPI controller + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx> + +description: + All the SPI controller nodes should be represented in the aliases node using + the following format 'spi{n}' where n is a unique number for the alias. + +properties: + compatible: + oneOf: + - enum: + - samsung,s3c2443-spi # for S3C2443, S3C2416 and S3C2450 + - samsung,s3c6410-spi + - samsung,s5pv210-spi # for S5PV210 and S5PC110 + - samsung,exynos5433-spi + - const: samsung,exynos7-spi + deprecated: true + + clocks: + minItems: 2 + maxItems: 3 + + clock-names: + minItems: 2 + maxItems: 3 + + cs-gpios: true + + dmas: + minItems: 2 + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + interrupts: + maxItems: 1 + + no-cs-readback: + description: + The CS line is disconnected, therefore the device should not operate + based on CS signalling. + type: boolean + + num-cs: + minimum: 1 + maximum: 4 + default: 1 + + samsung,spi-src-clk: + description: + If the spi controller includes a internal clock mux to select the clock + source for the spi bus clock, this property can be used to indicate the + clock to be used for driving the spi bus clock. If not specified, the + clock number 0 is used as default. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - dmas + - dma-names + - interrupts + - reg + +allOf: + - $ref: spi-controller.yaml# + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-spi + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: spi + - enum: + - spi_busclk0 + - spi_busclk1 + - spi_busclk2 + - spi_busclk3 + - const: spi_ioclk + else: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: spi + - enum: + - spi_busclk0 + - spi_busclk1 + - spi_busclk2 + - spi_busclk3 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5433.h> + #include <dt-bindings/clock/samsung,s2mps11.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + + spi@14d30000 { + compatible = "samsung,exynos5433-spi"; + reg = <0x14d30000 0x100>; + interrupts = <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&pdma0 11>, <&pdma0 10>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peric CLK_PCLK_SPI1>, + <&cmu_peric CLK_SCLK_SPI1>, + <&cmu_peric CLK_SCLK_IOCLK_SPI1>; + clock-names = "spi", + "spi_busclk0", + "spi_ioclk"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + num-cs = <1>; + + cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; + + audio-codec@0 { + compatible = "wlf,wm5110"; + reg = <0x0>; + spi-max-frequency = <20000000>; + interrupt-parent = <&gpa0>; + interrupts = <4 IRQ_TYPE_NONE>; + clocks = <&pmu_system_controller 0>, + <&s2mps13_osc S2MPS11_CLK_BT>; + clock-names = "mclk1", "mclk2"; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + wlf,micd-detect-debounce = <300>; + wlf,micd-bias-start-time = <0x1>; + wlf,micd-rate = <0x7>; + wlf,micd-dbtime = <0x2>; + wlf,micd-force-micbias; + wlf,micd-configs = <0x0 1 0>; + wlf,hpdet-channel = <1>; + wlf,gpsw = <0x1>; + wlf,inmode = <2 0 2 0>; + + wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>; + wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>; + + /* core supplies */ + AVDD-supply = <&ldo18_reg>; + DBVDD1-supply = <&ldo18_reg>; + CPVDD-supply = <&ldo18_reg>; + DBVDD2-supply = <&ldo18_reg>; + DBVDD3-supply = <&ldo18_reg>; + SPKVDDL-supply = <&ldo18_reg>; + SPKVDDR-supply = <&ldo18_reg>; + + controller-data { + samsung,spi-feedback-delay = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml index 5dd209206e88..df885eeb144f 100644 --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml @@ -85,5 +85,6 @@ properties: # The controller specific properties go here. allOf: - $ref: cdns,qspi-nor-peripheral-props.yaml# + - $ref: samsung,spi-peripheral-props.yaml# additionalProperties: true diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt deleted file mode 100644 index 49028a4f5df1..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-samsung.txt +++ /dev/null @@ -1,122 +0,0 @@ -* Samsung SPI Controller - -The Samsung SPI controller is used to interface with various devices such as flash -and display controllers using the SPI communication interface. - -Required SoC Specific Properties: - -- compatible: should be one of the following. - - samsung,s3c2443-spi: for s3c2443, s3c2416 and s3c2450 platforms - - samsung,s3c6410-spi: for s3c6410 platforms - - samsung,s5pv210-spi: for s5pv210 and s5pc110 platforms - - samsung,exynos5433-spi: for exynos5433 compatible controllers - - samsung,exynos7-spi: for exynos7 platforms <DEPRECATED> - -- reg: physical base address of the controller and length of memory mapped - region. - -- interrupts: The interrupt number to the cpu. The interrupt specifier format - depends on the interrupt controller. - -- dmas : Two or more DMA channel specifiers following the convention outlined - in bindings/dma/dma.txt - -- dma-names: Names for the dma channels. There must be at least one channel - named "tx" for transmit and named "rx" for receive. - -- clocks: specifies the clock IDs provided to the SPI controller; they are - required for interacting with the controller itself, for synchronizing the bus - and as I/O clock (the latter is required by exynos5433 and exynos7). - -- clock-names: string names of the clocks in the 'clocks' property; for all the - the devices the names must be "spi", "spi_busclkN" (where N is determined by - "samsung,spi-src-clk"), while Exynos5433 should specify a third clock - "spi_ioclk" for the I/O clock. - -Required Board Specific Properties: - -- #address-cells: should be 1. -- #size-cells: should be 0. - -Optional Board Specific Properties: - -- samsung,spi-src-clk: If the spi controller includes a internal clock mux to - select the clock source for the spi bus clock, this property can be used to - indicate the clock to be used for driving the spi bus clock. If not specified, - the clock number 0 is used as default. - -- num-cs: Specifies the number of chip select lines supported. If - not specified, the default number of chip select lines is set to 1. - -- cs-gpios: should specify GPIOs used for chipselects (see spi-bus.txt) - -- no-cs-readback: the CS line is disconnected, therefore the device should not - operate based on CS signalling. - -SPI Controller specific data in SPI slave nodes: - -- The spi slave nodes should provide the following information which is required - by the spi controller. - - - samsung,spi-feedback-delay: The sampling phase shift to be applied on the - miso line (to account for any lag in the miso line). The following are the - valid values. - - - 0: No phase shift. - - 1: 90 degree phase shift sampling. - - 2: 180 degree phase shift sampling. - - 3: 270 degree phase shift sampling. - -Aliases: - -- All the SPI controller nodes should be represented in the aliases node using - the following format 'spi{n}' where n is a unique number for the alias. - - -Example: - -- SoC Specific Portion: - - spi_0: spi@12d20000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x12d20000 0x100>; - interrupts = <0 66 0>; - dmas = <&pdma0 5 - &pdma0 4>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - }; - -- Board Specific Portion: - - spi_0: spi@12d20000 { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_bus>; - cs-gpios = <&gpa2 5 0>; - - w25q80bw@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "w25x80"; - reg = <0>; - spi-max-frequency = <10000>; - - controller-data { - samsung,spi-feedback-delay = <0>; - }; - - partition@0 { - label = "U-Boot"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "Kernel"; - reg = <0x40000 0xc0000>; - }; - }; - }; diff --git a/MAINTAINERS b/MAINTAINERS index 77c01b55099c..f0b083b279de 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17114,7 +17114,7 @@ M: Andi Shyti <andi@xxxxxxxxxxx> L: linux-spi@xxxxxxxxxxxxxxx L: linux-samsung-soc@xxxxxxxxxxxxxxx S: Maintained -F: Documentation/devicetree/bindings/spi/spi-samsung.txt +F: Documentation/devicetree/bindings/spi/samsung,spi*.yaml F: drivers/spi/spi-s3c* F: include/linux/platform_data/spi-s3c64xx.h F: include/linux/spi/s3c24xx-fiq.h -- 2.32.0
