> Wiadomość napisana przez Peter Geis <pgwipeout@xxxxxxxxx> w dniu 17.01.2022, o godz. 14:49: > >> >> Peter, >> >> I'm trying to use this series to get thermal on rk3566 based tvbox (x96-x6). >> Driver loads but i'm getting following error: >> >> [ 132.873979] rockchip-thermal fe710000.tsadc: failed to register sensor 0: -517 >> [ 132.874650] rockchip-thermal fe710000.tsadc: failed to register sensor[0] : error = -517 >> >> Maybe you have some hints here? > > Error -517 means -EPROBE_DEFER, a device it relies on hasn't probed. > TSADC doesn't directly rely on anything that shouldn't already be > enabled. (Pinctrl, clocks, and grf all break a lot more than tsadc if > disabled) > Does your kernel config have all of the rockchip elements enabled? > Peter, For sure I can't say 'yes' with 100% confidence. I'm trying do my best for rk3566 (currently have working: SD/Eth/HDMI/Sound/USB2port0/BT). Maybe you may point me pls for good reference of rk356x defconfig? btw: a bit of context: In my application (https://github.com/warpme/minimyth2) i have target to have single OS binary for all supported Allwinner/Amlogic/Rockchip/Broadcom devices. By this kernel config i'm using is painfully assembled to have minimal working kernel for all targets. It's a painful road....but still want to go this route for: minimal image size; shortest build time & one-for-all binary. my current config: https://github.com/warpme/minimyth2/blob/master/script/kernel/linux-5.16/files/linux-5.16-arm64-armv8.config btw2: for rk3566 i'm using majority of your patches! Great work of you!
