Re: [PATCH v6 2/5] MFD: RK808: Add new mfd driver for RK808

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Heiko,

On Wed, Aug 27, 2014 at 12:53 PM, Heiko Stübner <heiko@xxxxxxxxx> wrote:
> Hi Chris,
>
> Am Dienstag, 26. August 2014, 22:14:04 schrieb Chris Zhong:
>> The RK808 chip is a power management IC for multimedia and handheld
>> devices. It contains the following components:
>>
>> - Regulators
>> - RTC
>> - Clkout
>>
>> The RK808 core driver is registered as a platform driver and provides
>> communication through I2C with the host device for the different
>> components.
>>
>> Signed-off-by: Chris Zhong <zyw@xxxxxxxxxxxxxx>
>> Signed-off-by: Zhang Qing <zhangqing@xxxxxxxxxxxxxx>
>>
>> ---
>
> when testing this with Dougs dts integration I got irq errors like the
> following:
>
> INT_STS_REG1: 0x0
> INT_STS_MSK_REG1: 0x0
> INT_STS_REG2: 0x1
> INT_STS_MSK_REG2: 0x0
> random: nonblocking pool is initialized
> irq 192: nobody cared (try booting with the "irqpoll" option)
> CPU: 0 PID: 40 Comm: irq/192-rk808 Not tainted 3.17.0-rc1+ #1015
> [<c001461c>] (unwind_backtrace) from [<c0011190>] (show_stack+0x10/0x14)
> [<c0011190>] (show_stack) from [<c03e3e04>] (dump_stack+0x6c/0x84)
> [<c03e3e04>] (dump_stack) from [<c00508e4>] (__report_bad_irq+0x28/0xb8)
> [<c00508e4>] (__report_bad_irq) from [<c0050de4>] (note_interrupt+0x1e8/0x28c)
> [<c0050de4>] (note_interrupt) from [<c004ebdc>] (handle_irq_event_percpu+0x104/0x120)
> [<c004ebdc>] (handle_irq_event_percpu) from [<c004ec3c>] (handle_irq_event+0x44/0x64)
> [<c004ec3c>] (handle_irq_event) from [<c0051910>] (handle_level_irq+0xd4/0x11c)
> [<c0051910>] (handle_level_irq) from [<c004e5a8>] (generic_handle_irq+0x20/0x30)
> [<c004e5a8>] (generic_handle_irq) from [<c01ba490>] (rockchip_irq_demux+0x190/0x228)
> [<c01ba490>] (rockchip_irq_demux) from [<c004e5a8>] (generic_handle_irq+0x20/0x30)
> [<c004e5a8>] (generic_handle_irq) from [<c000f060>] (handle_IRQ+0x68/0x90)
> [<c000f060>] (handle_IRQ) from [<c000858c>] (gic_handle_irq+0x3c/0x60)
> [<c000858c>] (gic_handle_irq) from [<c0011bc0>] (__irq_svc+0x40/0x50)
> Exception stack(0xee31bed8 to 0xee31bf20)
> bec0:                                                       ee093518 f005e000
> bee0: 00000010 000093e9 ee1fe880 ee2f98c0 ee1fe880 ee2f98e0 c004f6f0 00000000
> bf00: 00000000 00000000 c03eb6d0 ee31bf20 c00522dc c004f628 60000113 ffffffff
> [<c0011bc0>] (__irq_svc) from [<c004f628>] (irq_finalize_oneshot+0xd4/0xf0)
> [<c004f628>] (irq_finalize_oneshot) from [<c004f71c>] (irq_thread_fn+0x2c/0x34)
> [<c004f71c>] (irq_thread_fn) from [<c004f844>] (irq_thread+0xc4/0x148)
> [<c004f844>] (irq_thread) from [<c0035524>] (kthread+0xdc/0xf0)
> [<c0035524>] (kthread) from [<c000e7f8>] (ret_from_fork+0x14/0x3c)
> handlers:
> [<c004ec5c>] irq_default_primary_handler threaded [<c021cc7c>] regmap_irq_thread
> Disabling IRQ #192
>
>
> As you can see there was already a PLUG_IN_INT pending, which stalled the
> system till the irq got deactivated after 100000 iterations:
>
>            CPU0
> [...]
>  92:     600231       GIC  92  ff650000.i2c
> 192:     100001  rockchip_gpio_irq   4  rk808
>
>
> I fixed it up with the following:
>
> ------------ 8< ---------------
> diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
> index f0d6518..1c25be7 100644
> --- a/drivers/mfd/rk808.c
> +++ b/drivers/mfd/rk808.c
> @@ -61,8 +61,14 @@ static const struct rk808_reg_data pre_init_reg[] = {
>         { RK808_BUCK2_CONFIG_REG, BUCK2_RATE_MASK,  BUCK_ILMIN_200MA },
>         { RK808_VB_MON_REG,       MASK_ALL,         VB_LO_ACT |
>                                                     VB_LO_SEL_3500MV },
> -       { RK808_INT_STS_REG1,     MASK_NONE,        0 },
> -       { RK808_INT_STS_REG2,     MASK_NONE,        0 },
> +
> +       /* ack any pending interrupts */
> +       { RK808_INT_STS_REG1,     INT_STS_REG1_MASK, INT_STS_REG1_MASK },
> +       { RK808_INT_STS_REG2,     INT_STS_REG2_MASK, INT_STS_REG2_MASK },
> +
> +       /* mask all interrupts */
> +       { RK808_INT_STS_MSK_REG1, INT_STS_REG1_MASK, INT_STS_REG1_MASK },
> +       { RK808_INT_STS_MSK_REG2, INT_STS_REG2_MASK, INT_STS_REG2_MASK },
>  };
>
>  static const struct regmap_irq rk808_irqs[] = {
> diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
> index 7af1952..8f8e48c 100644
> --- a/include/linux/mfd/rk808.h
> +++ b/include/linux/mfd/rk808.h
> @@ -156,6 +156,8 @@ enum rk808_reg {
>  #define BUCK2_RATE_MASK                (3 << 3)
>  #define MASK_ALL       0xff
>  #define MASK_NONE      0
> +#define INT_STS_REG1_MASK      0x7f
> +#define INT_STS_REG2_MASK      0x3
>
>  #define SWITCH2_EN     BIT(6)
>  #define SWITCH1_EN     BIT(5)
> ------------ 8< ---------------
>
> On startup I guess all pending irqs should be acked and also masked, as we normally
> don't want to handle interrupts that happened way in the past and they
> will get unmasked on their own, when one of them gets requested by the rtc
> for example.
>
>
> Heiko

Please see <https://chromium-review.googlesource.com/214241>  I asked
Chris to squash this into his next revision.

-Doug
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux