Am Mittwoch, dem 05.01.2022 um 10:23 -0600 schrieb Rob Herring: > On Fri, Dec 3, 2021 at 10:19 AM Rob Herring <robh@xxxxxxxxxx> wrote: > > > > On Mon, Sep 6, 2021 at 5:29 AM Martin Kepplinger > > <martin.kepplinger@xxxxxxx> wrote: > > > > > > Document the bindings used for the SK Hynix Hi-846 CMOS camera > > > driver. > > > > > > Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx> > > > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > > > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > > > --- > > > .../bindings/media/i2c/hynix,hi846.yaml | 120 > > > ++++++++++++++++++ > > > 1 file changed, 120 insertions(+) > > > create mode 100644 > > > Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml > > > > > > diff --git > > > a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml > > > b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml > > > new file mode 100644 > > > index 000000000000..85a8877c2f38 > > > --- /dev/null > > > +++ > > > b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml > > > @@ -0,0 +1,120 @@ > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/media/i2c/hynix,hi846.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: SK Hynix Hi-846 1/4" 8M Pixel MIPI CSI-2 sensor > > > + > > > +maintainers: > > > + - Martin Kepplinger <martin.kepplinger@xxxxxxx> > > > + > > > +description: |- > > > + The Hi-846 is a raw image sensor with an MIPI CSI-2 image data > > > + interface and CCI (I2C compatible) control bus. The output > > > format > > > + is raw Bayer. > > > + > > > +properties: > > > + compatible: > > > + const: hynix,hi846 > > > + > > > + reg: > > > + maxItems: 1 > > > + > > > + clocks: > > > + items: > > > + - description: Reference to the mclk clock. > > > + > > > + assigned-clocks: > > > + maxItems: 1 > > > + > > > + assigned-clock-rates: > > > + maxItems: 1 > > > + > > > + reset-gpios: > > > + description: Reference to the GPIO connected to the RESETB > > > pin. Active low. > > > + maxItems: 1 > > > + > > > + shutdown-gpios: > > > + description: Reference to the GPIO connected to the > > > XSHUTDOWN pin. Active low. > > > + maxItems: 1 > > > + > > > + vddio-supply: > > > + description: Definition of the regulator used for the VDDIO > > > power supply. > > > + > > > + vdda-supply: > > > + description: Definition of the regulator used for the VDDA > > > power supply. > > > + > > > + vddd-supply: > > > + description: Definition of the regulator used for the VDDD > > > power supply. > > > + > > > + port: > > > + $ref: /schemas/graph.yaml#/properties/port > > > > This needs to be: > > > > $ref: /schemas/graph.yaml#/$defs/port-base > > > > to fix the warning reported. You have to use the 'main' branch of > > dtschema which has unevaluatedProperties support. I'll be making a > > release soonish. > > This is still failing, can you please fix it. > > Rob Yes I'll send a patch next week. thanks for the reminder, martin
