Re: [PATCH v9 2/4] dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Dec 3, 2021 at 10:19 AM Rob Herring <robh@xxxxxxxxxx> wrote:
>
> On Mon, Sep 6, 2021 at 5:29 AM Martin Kepplinger
> <martin.kepplinger@xxxxxxx> wrote:
> >
> > Document the bindings used for the SK Hynix Hi-846 CMOS camera driver.
> >
> > Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx>
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> > ---
> >  .../bindings/media/i2c/hynix,hi846.yaml       | 120 ++++++++++++++++++
> >  1 file changed, 120 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> > new file mode 100644
> > index 000000000000..85a8877c2f38
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> > @@ -0,0 +1,120 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/i2c/hynix,hi846.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: SK Hynix Hi-846 1/4" 8M Pixel MIPI CSI-2 sensor
> > +
> > +maintainers:
> > +  - Martin Kepplinger <martin.kepplinger@xxxxxxx>
> > +
> > +description: |-
> > +  The Hi-846 is a raw image sensor with an MIPI CSI-2 image data
> > +  interface and CCI (I2C compatible) control bus. The output format
> > +  is raw Bayer.
> > +
> > +properties:
> > +  compatible:
> > +    const: hynix,hi846
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: Reference to the mclk clock.
> > +
> > +  assigned-clocks:
> > +    maxItems: 1
> > +
> > +  assigned-clock-rates:
> > +    maxItems: 1
> > +
> > +  reset-gpios:
> > +    description: Reference to the GPIO connected to the RESETB pin. Active low.
> > +    maxItems: 1
> > +
> > +  shutdown-gpios:
> > +    description: Reference to the GPIO connected to the XSHUTDOWN pin. Active low.
> > +    maxItems: 1
> > +
> > +  vddio-supply:
> > +    description: Definition of the regulator used for the VDDIO power supply.
> > +
> > +  vdda-supply:
> > +    description: Definition of the regulator used for the VDDA power supply.
> > +
> > +  vddd-supply:
> > +    description: Definition of the regulator used for the VDDD power supply.
> > +
> > +  port:
> > +    $ref: /schemas/graph.yaml#/properties/port
>
> This needs to be:
>
> $ref: /schemas/graph.yaml#/$defs/port-base
>
> to fix the warning reported. You have to use the 'main' branch of
> dtschema which has unevaluatedProperties support. I'll be making a
> release soonish.

This is still failing, can you please fix it.

Rob



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux