Controller driver needs to correctly configure PCIe link if it contains 1
or 4 SerDes PCIe lanes. Therefore add a new 'num-lanes' DT property for
mvebu PCIe controller. Property 'num-lanes' seems to be de-facto standard
way how number of lanes is specified in other PCIe controllers.
Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
---
Documentation/devicetree/bindings/pci/mvebu-pci.txt | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
index 6173af6885f8..24225852bce0 100644
--- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt
+++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
@@ -77,6 +77,7 @@ and the following optional properties:
- marvell,pcie-lane: the physical PCIe lane number, for ports having
multiple lanes. If this property is not found, we assume that the
value is 0.
+- num-lanes: number of SerDes PCIe lanes for this link (1 or 4)
- reset-gpios: optional GPIO to PERST#
- reset-delay-us: delay in us to wait after reset de-assertion, if not
specified will default to 100ms, as required by the PCIe specification.
@@ -141,6 +142,7 @@ pcie-controller {
interrupt-map = <0 0 0 0 &mpic 58>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
+ num-lanes = <1>;
/* low-active PERST# reset on GPIO 25 */
reset-gpios = <&gpio0 25 1>;
/* wait 20ms for device settle after reset deassertion */
@@ -161,6 +163,7 @@ pcie-controller {
interrupt-map = <0 0 0 0 &mpic 59>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <1>;
+ num-lanes = <1>;
clocks = <&gateclk 6>;
};
@@ -177,6 +180,7 @@ pcie-controller {
interrupt-map = <0 0 0 0 &mpic 60>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <2>;
+ num-lanes = <1>;
clocks = <&gateclk 7>;
};
@@ -193,6 +197,7 @@ pcie-controller {
interrupt-map = <0 0 0 0 &mpic 61>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <3>;
+ num-lanes = <1>;
clocks = <&gateclk 8>;
};
@@ -209,6 +214,7 @@ pcie-controller {
interrupt-map = <0 0 0 0 &mpic 62>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
+ num-lanes = <1>;
clocks = <&gateclk 9>;
};
@@ -225,6 +231,7 @@ pcie-controller {
interrupt-map = <0 0 0 0 &mpic 63>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <1>;
+ num-lanes = <1>;
clocks = <&gateclk 10>;
};
@@ -241,6 +248,7 @@ pcie-controller {
interrupt-map = <0 0 0 0 &mpic 64>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <2>;
+ num-lanes = <1>;
clocks = <&gateclk 11>;
};
@@ -257,6 +265,7 @@ pcie-controller {
interrupt-map = <0 0 0 0 &mpic 65>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <3>;
+ num-lanes = <1>;
clocks = <&gateclk 12>;
};
@@ -273,6 +282,7 @@ pcie-controller {
interrupt-map = <0 0 0 0 &mpic 99>;
marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
+ num-lanes = <1>;
clocks = <&gateclk 26>;
};
@@ -289,6 +299,7 @@ pcie-controller {
interrupt-map = <0 0 0 0 &mpic 103>;
marvell,pcie-port = <3>;
marvell,pcie-lane = <0>;
+ num-lanes = <1>;
clocks = <&gateclk 27>;
};
};
--
2.20.1
