On Wed, Aug 27, 2014 at 02:37:44PM +0100, Marc Zyngier wrote: > [Adding Jiang Liu to the spam-fest] > > Hi Thomas, > > On Wed, Aug 27 2014 at 1:23:48 pm BST, Thomas Gleixner <tglx@xxxxxxxxxxxxx> wrote: > > On Wed, 27 Aug 2014, Marc Zyngier wrote: > >> > As in the DT the actual IRQ polarity should be used, simply configuring > >> > the HW IRQ polarity in the bootloader is not enough without telling the > >> > GIC driver which polarity is supported on which IRQ, right? > >> > >> Looking a bit closer at things, what you describe in DT is the IRQ > >> polarity the interrupt controller sees. Nothing else should interpret > >> that field. > >> > >> So it is legal (IMO) to have a device with an interrupt specifier > >> describing a rising edge interrupt, and yet have the device generating a > >> falling edge, with Mediatek's special sauce doing the conversion in between. > >> > >> Something will have to configure the polarity widget though, but that > >> can be left outside of the GIC. > > > > This seems to become a popular topic and it looks like the whole GIC > > extension thing is going to explode sooner than later. > > > > We are currently discussing hierarchical irq domains to solve a > > different issue in x86 land. See the related discussion here: > > > > https://lkml.org/lkml/2014/8/1/67 > > Ah, very interesting. Thanks for pointing that out. > > > Now looking at these GIC plus extra sauce problems, I wonder whether > > this wouldn't be solvable in a similar way. If you look at it from the > > HW perspective you have: > > > > --------- --------- > > ---| MAGIC |------|ARM GIC| > > ---| |------| | > > ---| |------| | > > ---| |------| | > > ---| |------| | > > --------- --------- > > > > The MAGIC interrupt controller only provides functionality which is > > not available from the ARM architected GIC but maps 1:1 to the ARM GIC > > interrupt lines. So it looks like a variation to the more dynamic > > mapping of MSI -> Remap -> CPU-Vector problem we need to solve on x86. > > > > The idea is to have two irq domains: magic_domain and armgic_domain. > > > > The magic_domain is the frontend facing the devices and the > > armgic_domain is the parent domain. This is also reflected in > > hierarchical data structures, i.e. irq_desc->irq_data will get a new > > field parent_data, which points to the irq_data of the parent > > interrupt controller, which is allocated separately when the interrupt > > line is instantiated. > > > > So in the above case the hotpath ack/eoi functions of the irq chip > > associated to the device interrupt, i.e. magic_chip, would do: > > > > irq_ack(struct irq_data *d) > > { > > struct irq_data *pd = d->parent_data; > > > > pd->chip->irq_ack(pd); > > } > > > > Granted, that's another level of indirection, but this is going to be > > more efficient than a boatload of conditional hooks in the GIC code > > proper. Not to talk about the maintainability of the whole maze. > > > > The irq_set_type() function would do: > > > > irq_set_type(struct irq_data *d, int type) > > { > > struct irq_data *pd = d->parent_data; > > > > gic_type = set_magic_chip_type(d, type); > > > > return pd->chip->irq_set_type(d, gic_type); > > } > > > > Switching to this allows to completely avoid the gazillion of hooks in > > the gic code and should work nicely with multiplatform kernels by > > simpling hooking up the domain parent relation ship to the proper > > magic domain or leave the armgic as the direct device interface in > > case the SoC does not have the magic chip in front of the arm gic. > > > > Thoughts? > > I very much like that kind of approach. Stacking domains seems to solve > a number of issues at once: > > - NVIDIA's gic extension > - TI's crossbar > - ARM's GICv2m > - Mediatek's glorified line inverter > - ... and probably the next madness that's going to land tomorrow > > I haven't completly groked the way we're going to allocate domains and > irq_data structures, but this is definitely something worth > investigating. I'm not too worried about the indirection either - at > least we end up with maintainable code. > > We need to work out how to drive the whole stacking from a DT > perspective: Mark, any idea? Describing the lines the magic irqchip has to its parent irqchip is simple, the standard interrupts property can handle that: parent: parent { ... #interrupt-cells = <1>; }; magic { ... interrupt-parent = <&parent>; interrupts = <3>, <6>, <17>, <2>; #interrupt-cells = <1>; }; The harder part is describing the configuration of each interrupt to the magic irqchip (e.g. edge vs level triggered), which is inseparable form the line identifier in the interrupt-specifier. If there interrupts don't share the same configuration then I'm not sure how we describe that in the DT. That's especially problematic if the assignment of parent line is dynamic (as with the crossbar iirc). Mark. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
