On 28/04/2021 08:54, Roger Lu wrote:
add compitable/reg/irq/clock/efuse setting in svs node
Signed-off-by: Roger Lu <roger.lu@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 80519a145f13..441d617ece43 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -657,6 +657,18 @@
status = "disabled";
};
+ svs: svs@1100b000 {
+ compatible = "mediatek,mt8183-svs";
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_THERM>;
+ clock-names = "main";
+ nvmem-cells = <&svs_calibration>,
+ <&thermal_calibration>;
+ nvmem-cell-names = "svs-calibration-data",
+ "t-calibration-data";
+ };
+
pwm0: pwm@1100e000 {
compatible = "mediatek,mt8183-disp-pwm";
reg = <0 0x1100e000 0 0x1000>;
@@ -941,9 +953,15 @@
reg = <0 0x11f10000 0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
Please add a new line between the different calibartion data, to improve
readability.
Regards,
Matthias
+ thermal_calibration: calib@180 {
+ reg = <0x180 0xc>;
+ };
mipi_tx_calibration: calib@190 {
reg = <0x190 0xc>;
};
+ svs_calibration: calib@580 {
+ reg = <0x580 0x64>;
+ };
};
u3phy: usb-phy@11f40000 {
