This convert the BCM2835 DMA bindings to YAML format.
Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
---
.../devicetree/bindings/dma/brcm,bcm2835-dma.txt | 83 ----------------
.../devicetree/bindings/dma/brcm,bcm2835-dma.yaml | 107 +++++++++++++++++++++
2 files changed, 107 insertions(+), 83 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt
create mode 100644 Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml
diff --git a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt
deleted file mode 100644
index b6a8cc0..0000000
--- a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-* BCM2835 DMA controller
-
-The BCM2835 DMA controller has 16 channels in total.
-Only the lower 13 channels have an associated IRQ.
-Some arbitrary channels are used by the firmware
-(1,3,6,7 in the current firmware version).
-The channels 0,2 and 3 have special functionality
-and should not be used by the driver.
-
-Required properties:
-- compatible: Should be "brcm,bcm2835-dma".
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain the DMA interrupts associated
- to the DMA channels in ascending order.
-- interrupt-names: Should contain the names of the interrupt
- in the form "dmaXX".
- Use "dma-shared-all" for the common interrupt line
- that is shared by all dma channels.
-- #dma-cells: Must be <1>, the cell in the dmas property of the
- client device represents the DREQ number.
-- brcm,dma-channel-mask: Bit mask representing the channels
- not used by the firmware in ascending order,
- i.e. first channel corresponds to LSB.
-
-Example:
-
-dma: dma@7e007000 {
- compatible = "brcm,bcm2835-dma";
- reg = <0x7e007000 0xf00>;
- interrupts = <1 16>,
- <1 17>,
- <1 18>,
- <1 19>,
- <1 20>,
- <1 21>,
- <1 22>,
- <1 23>,
- <1 24>,
- <1 25>,
- <1 26>,
- /* dma channel 11-14 share one irq */
- <1 27>,
- <1 27>,
- <1 27>,
- <1 27>,
- /* unused shared irq for all channels */
- <1 28>;
- interrupt-names = "dma0",
- "dma1",
- "dma2",
- "dma3",
- "dma4",
- "dma5",
- "dma6",
- "dma7",
- "dma8",
- "dma9",
- "dma10",
- "dma11",
- "dma12",
- "dma13",
- "dma14",
- "dma-shared-all";
-
- #dma-cells = <1>;
- brcm,dma-channel-mask = <0x7f35>;
-};
-
-
-DMA clients connected to the BCM2835 DMA controller must use the format
-described in the dma.txt file, using a two-cell specifier for each channel.
-
-Example:
-
-bcm2835_i2s: i2s@7e203000 {
- compatible = "brcm,bcm2835-i2s";
- reg = < 0x7e203000 0x24>;
- clocks = <&clocks BCM2835_CLOCK_PCM>;
-
- dmas = <&dma 2>,
- <&dma 3>;
- dma-names = "tx", "rx";
-};
diff --git a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml
new file mode 100644
index 0000000..44cb83f
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/brcm,bcm2835-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2835 DMA controller
+
+maintainers:
+ - Nicolas Saenz Julienne <nsaenz@xxxxxxxxxx>
+
+description: |
+ The BCM2835 DMA controller has 16 channels in total.
+ Only the lower 13 channels have an associated IRQ.
+ Some arbitrary channels are used by the firmware
+ (1,3,6,7 in the current firmware version).
+ The channels 0,2 and 3 have special functionality
+ and should not be used by the driver.
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ const: brcm,bcm2835-dma
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ Should contain the DMA interrupts associated to the DMA channels in
+ ascending order.
+ minItems: 1
+ maxItems: 16
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 16
+
+ "#dma-cells":
+ const: 1
+ description: >
+ DMA clients must use the format described in dma.txt, giving a phandle
+ to the DMA controller while the second cell in the dmas property of the
+ client device represents the DREQ number.
+
+ brcm,dma-channel-mask:
+ description:
+ Bit mask representing the channels not used by the firmware in
+ ascending order, i.e. first channel corresponds to LSB.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#dma-cells"
+ - brcm,dma-channel-mask
+
+additionalProperties: false
+
+examples:
+ - |
+ dma: dma-controller@7e007000 {
+ compatible = "brcm,bcm2835-dma";
+ reg = <0x7e007000 0xf00>;
+ interrupts = <1 16>,
+ <1 17>,
+ <1 18>,
+ <1 19>,
+ <1 20>,
+ <1 21>,
+ <1 22>,
+ <1 23>,
+ <1 24>,
+ <1 25>,
+ <1 26>,
+ /* dma channel 11-14 share one irq */
+ <1 27>,
+ <1 27>,
+ <1 27>,
+ <1 27>,
+ /* unused shared irq for all channels */
+ <1 28>;
+ interrupt-names = "dma0",
+ "dma1",
+ "dma2",
+ "dma3",
+ "dma4",
+ "dma5",
+ "dma6",
+ "dma7",
+ "dma8",
+ "dma9",
+ "dma10",
+ "dma11",
+ "dma12",
+ "dma13",
+ "dma14",
+ "dma-shared-all";
+ #dma-cells = <1>;
+ brcm,dma-channel-mask = <0x7f35>;
+ };
+
+...
--
2.7.4
