Add support for the cyttsp5 touchscreen controller for the reMarkable 2. Signed-off-by: Alistair Francis <alistair@xxxxxxxxxxxxx> --- arch/arm/boot/dts/imx7d-remarkable2.dts | 89 +++++++++++++++++++++++++ 1 file changed, 89 insertions(+) diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts index 89cbf13097a4..f12d6805b214 100644 --- a/arch/arm/boot/dts/imx7d-remarkable2.dts +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "imx7d.dtsi" +#include <dt-bindings/input/linux-event-codes.h> / { model = "reMarkable 2.0"; @@ -34,6 +35,18 @@ reg_brcm: regulator-brcm { startup-delay-us = <150>; }; + reg_touch: regulator-touch { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_TOUCH"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_touch_reg>; + pinctrl-1 = <&pinctrl_touch_reg>; + gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; @@ -51,6 +64,59 @@ &clks { assigned-clock-rates = <0>, <32768>; }; +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + tsc@24 { + compatible = "cypress,tt21000"; + reg = <0x24>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch>; + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + vdd-supply = <®_touch>; + touchscreen-size-x = <880>; + touchscreen-size-y = <1280>; + + button-0 { + linux,code = <KEY_HOMEPAGE>; + }; + + button-1 { + linux,code = <KEY_MENU>; + }; + + button-2 { + linux,code = <KEY_BACK>; + }; + + button-3 { + linux,code = <KEY_SEARCH>; + }; + + button-4 { + linux,code = <KEY_VOLUMEDOWN>; + }; + + button-5 { + linux,code = <KEY_VOLUMEUP>; + }; + + button-6 { + linux,code = <KEY_CAMERA>; + }; + + button-7 { + linux,code = <KEY_POWER>; + }; + }; +}; + &snvs_pwrkey { status = "okay"; }; @@ -125,6 +191,29 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x14 >; }; + pinctrl_touch: touchgrp { + fsl,pins = < + /* CYTTSP interrupt */ + MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x54 + /* CYTTSP reset */ + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x04 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f + MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f + >; + }; + + pinctrl_touch_reg: touchreggrp { + fsl,pins = < + /* TOUCH_PWR_EN */ + MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x14 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 -- 2.31.1