Re: [RFC PATCH 0/3] Add driver for Renesas RZ/G2L CRU module

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Dec 7, 2021 at 1:24 AM Lad Prabhakar
<prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
>
> Hi All,
>
> This patch series aims to add driver support to CRU module found
> on Renesas RZ/G2L SoC.
>
> The Camera Data Receiving Unit (CRU) consists of a MIPI CSI-2
> block and an Image Processing block. The Image Processing block
> can receive video data received from the external Digital Parallel
> Interface or MIPI CSI-2 block, and perform appropriate image
> processing for each.
>
> More details:
> * https://renesas.info/wiki/File:CRU.png
> * https://www.renesas.com/document/mah/
>   rzg2l-group-rzg2lc-group-users-manual-hardware-0?language=en&r=1467981
>
> Currently the driver has been tested using yavta and Gstreamer
> on RZ/G2L SMARC EVK using the ov5645 sensor on CSI2 interface
> only.
>
> root@smarc-rzg2l:~# media-ctl -p
> Media controller API version 5.16.0
>
> Media device information
> ------------------------
> driver          rzg2l_cru
> model           renesas,rzg2l-cru
> serial
> bus info        platform:10830000.video
> hw revision     0x0
> driver version  5.16.0
>
> Device topology
> - entity 1: rzg2l_cru 10830000.video (5 pads, 5 links)
>             type V4L2 subdev subtype Unknown flags 0
>             device node name /dev/v4l-subdev0
>         pad0: Sink
>                 [fmt:unknown/0x0]
>                 <- "ov5645 0-003c":0 [ENABLED,IMMUTABLE]
>         pad1: Source
>                 [fmt:unknown/0x0]
>                 -> "CRU output":0 []
>         pad2: Source
>                 [fmt:unknown/0x0]
>                 -> "CRU output":0 []
>         pad3: Source
>                 [fmt:unknown/0x0]
>                 -> "CRU output":0 []
>         pad4: Source
>                 [fmt:unknown/0x0]
>                 -> "CRU output":0 []
>
> - entity 7: ov5645 0-003c (1 pad, 1 link)
>             type V4L2 subdev subtype Sensor flags 0
>             device node name /dev/v4l-subdev1
>         pad0: Source
>                 [fmt:UYVY8_2X8/1920x1080 field:none colorspace:srgb
>                  crop:(0,0)/1920x1080]
>                 -> "rzg2l_cru 10830000.video":0 [ENABLED,IMMUTABLE]
>
> - entity 15: CRU output (1 pad, 4 links)
>              type Node subtype V4L flags 0
>              device node name /dev/video0
>         pad0: Sink
>                 <- "rzg2l_cru 10830000.video":1 []
>                 <- "rzg2l_cru 10830000.video":2 []
>                 <- "rzg2l_cru 10830000.video":3 []
>                 <- "rzg2l_cru 10830000.video":4 []
>
> root@smarc-rzg2l:~#
> root@smarc-rzg2l:~# v4l2-compliance -s
> v4l2-compliance 1.22.1-4864, 64 bits, 64-bit time_t
> v4l2-compliance SHA: 47c8c377cf29 2021-10-23 15:12:35
>
> Compliance test for rzg2l_cru device /dev/video0:
>
> Driver Info:
>         Driver name      : rzg2l_cru
>         Card type        : RZG2L_CRU
>         Bus info         : platform:10830000.video
>         Driver version   : 5.16.0
>         Capabilities     : 0xa5200001
>                 Video Capture
>                 Read/Write
>                 Streaming
>                 Extended Pix Format
>                 Device Capabilities
>         Device Caps      : 0x25200001
>                 Video Capt[   32.432429] rzg2l-cru 10830000.video: =================  START STATUS  =================
> ure
>                 Read/Write
>                 Str[   32.442279] rzg2l-cru 10830000.video: ==================  END STATUS  ==================
> eaming
>                 Extended Pix Format
> Media Driver Info:
>         Driver name      : rzg2l_cru
>         Model            : renesas,rzg2l-cru
>         Serial           :
>         Bus info         : platform:10830000.video
>         Media version    : 5.16.0
>         Hardware revision: 0x00000000 (0)
>         Driver version   : 5.16.0
> Interface Info:
>         ID               : 0x03000011
>         Type             : V4L Video
> Entity Info:
>         ID               : 0x0000000f (15)
>         Name             : CRU output
>         Function         : V4L2 I/O
>         Pad 0x01000010   : 0: Sink
>           Link 0x02000013: from remote pad 0x1000003 of entity 'rzg2l_cru 10830000.video' (Video Pixel Formatter): Data, Enabled
>           Link 0x02000015: from remote pad 0x1000004 of entity 'rzg2l_cru 10830000.video' (Video Pixel Formatter): Data
>           Link 0x02000017: from remote pad 0x1000005 of entity 'rzg2l_cru 10830000.video' (Video Pixel Formatter): Data
>           Link 0x02000019: from remote pad 0x1000006 of entity 'rzg2l_cru 10830000.video' (Video Pixel Formatter): Data
>
> Required ioctls:
>         test MC information (see 'Media Driver Info' above): OK
>         test VIDIOC_QUERYCAP: OK
>         test invalid ioctls: OK
>
> Allow for multiple opens:
>         test second /dev/video0 open: OK
>         test VIDIOC_QUERYCAP: OK
>         test VIDIOC_G/S_PRIORITY: OK
>         test for unlimited opens: OK
>
> Debug ioctls:
>         test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
>         test VIDIOC_LOG_STATUS: OK
>
> Input ioctls:
>         test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
>         test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>         test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>         test VIDIOC_ENUMAUDIO: OK (Not Supported)
>         test VIDIOC_G/S/ENUMINPUT: OK
>         test VIDIOC_G/S_AUDIO: OK (Not Supported)
>         Inputs: 1 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
>         test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>         test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>         test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>         test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>         test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>         Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
>         test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>         test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
>         test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>         test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls (Input 0):
>         test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
>         test VIDIOC_QUERYCTRL: OK (Not Supported)
>         test VIDIOC_G/S_CTRL: OK (Not Supported)
>         test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
>         test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
>         test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>         Standard Controls: 0 Private Controls: 0
>
> Format ioctls (Input 0):
>         test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>         test VIDIOC_G/S_PARM: OK (Not Supported)
>         test VIDIOC_G_FBUF: OK (Not Supported)
>         test VIDIOC_G_FMT: OK
>         test VIDIOC_TRY_FMT: OK
>         test VIDIOC_S_FMT: OK
>         test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>         test Cropping: OK (Not Supported)
>         test Composing: OK (Not Supported)
>         test Scaling: OK
>
> Codec ioctls (Input 0):
>         test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>         test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>         test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls (Input 0):
>         test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>         test VIDIOC_EXPBUF: OK
>         test Requests: OK (Not Supported)
>
> Test input 0:
>
> Streaming ioctls:
>         test read/write: OK
>         test blocking wait: OK
>         test MMAP (no poll): OK
>         test MMAP (select): OK
>         test MMAP (epoll): OK
>         test USERPTR (no poll): OK (Not Supported)
>         test USERPTR (select): OK (Not Supported)
>         test DMABUF: Cannot test, specify --expbuf-device
>
> Total for rzg2l_cru device /dev/video0: 53, Succeeded: 53, Failed: 0, Warnings: 0
> root@smarc-rzg2l:~#
>
> Cheers,
> Prabhakar
>
> Lad Prabhakar (3):
>   media: dt-bindings: media: Document RZ/G2L CRU block
>   media: platform: Add CRU driver for RZ/G2L SoC
>   arm64: dts: renesas: r9a07g044: Add CRU node
>
>  .../bindings/media/renesas,rzg2l-cru.yaml     | 227 ++++++
>  arch/arm64/boot/dts/renesas/r9a07g044.dtsi    |  59 ++
>  drivers/media/platform/Kconfig                |   1 +
>  drivers/media/platform/Makefile               |   2 +
>  drivers/media/platform/rzg2l-cru/Kconfig      |  15 +
>  drivers/media/platform/rzg2l-cru/Makefile     |   4 +
>  drivers/media/platform/rzg2l-cru/rzg2l-core.c | 473 ++++++++++++
>  drivers/media/platform/rzg2l-cru/rzg2l-cru.h  | 244 ++++++
>  drivers/media/platform/rzg2l-cru/rzg2l-csi2.c | 625 ++++++++++++++++
>  drivers/media/platform/rzg2l-cru/rzg2l-dma.c  | 703 ++++++++++++++++++
>  drivers/media/platform/rzg2l-cru/rzg2l-v4l2.c | 361 +++++++++
>  11 files changed, 2714 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
>  create mode 100644 drivers/media/platform/rzg2l-cru/Kconfig
>  create mode 100644 drivers/media/platform/rzg2l-cru/Makefile
>  create mode 100644 drivers/media/platform/rzg2l-cru/rzg2l-core.c
>  create mode 100644 drivers/media/platform/rzg2l-cru/rzg2l-cru.h
>  create mode 100644 drivers/media/platform/rzg2l-cru/rzg2l-csi2.c
>  create mode 100644 drivers/media/platform/rzg2l-cru/rzg2l-dma.c
>  create mode 100644 drivers/media/platform/rzg2l-cru/rzg2l-v4l2.c
>
Gentle ping.

Cheers,
Prabhakar



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux