On Fri, Dec 17, 2021 at 10:58:40AM -0600, Adam Ford wrote: > On Thu, Dec 16, 2021 at 9:13 PM Shawn Guo <shawnguo@xxxxxxxxxx> wrote: > > > > On Tue, Dec 14, 2021 at 06:46:17PM -0600, Adam Ford wrote: > > > The i.MX8M Nano is similar to the i.MX8M Mini in some ways, but very > > > different in others. With the blk-ctrl driver for Mini in place, > > > this series expands the blk-ctrl driver to support the Nano which > > > opens the door for additional functions in the future. As part of > > > this series, it also addresses some issues in the GPCv2 driver and > > > finally adds support for enabling USB and GPU. > > > > > > V5: Clean up the GPU clock assignments. > > > V4: Rebase on top of [1] which fixes hangs caused from CSI and DSI reset > > > and add the same fixes for CSI and DSI to the Nano > > > V3: Fixes an the yaml example > > > V2: Fixes the clock count in the blk-ctrl > > > > > > [1] - https://www.spinics.net/lists/arm-kernel/msg936266.html > > > > > > Adam Ford (9): > > > soc: imx: gpcv2: keep i.MX8MN gpumix bus clock enabled > > > soc: imx: gpcv2: Add dispmix and mipi domains to imx8mn > > > dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains > > > dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl > > > soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl > > > arm64: dts: imx8mn: add GPC node > > > arm64: dts: imx8mn: put USB controller into power-domains > > > arm64: dts: imx8mn: add DISP blk-ctrl > > > arm64: dts: imx8mn: Enable GPU > > > > The series introduces hard dependency between different branches. To > > ease the merge process, let's postpone the DTS patches to the next > > cycle. > > That's fine. > Do I need to resubmit later, or will you take care of it when the next > merge window opens? I will take care of it. Shawn
