On Tue, Dec 14, 2021 at 06:46:17PM -0600, Adam Ford wrote: > The i.MX8M Nano is similar to the i.MX8M Mini in some ways, but very > different in others. With the blk-ctrl driver for Mini in place, > this series expands the blk-ctrl driver to support the Nano which > opens the door for additional functions in the future. As part of > this series, it also addresses some issues in the GPCv2 driver and > finally adds support for enabling USB and GPU. > > V5: Clean up the GPU clock assignments. > V4: Rebase on top of [1] which fixes hangs caused from CSI and DSI reset > and add the same fixes for CSI and DSI to the Nano > V3: Fixes an the yaml example > V2: Fixes the clock count in the blk-ctrl > > [1] - https://www.spinics.net/lists/arm-kernel/msg936266.html > > Adam Ford (9): > soc: imx: gpcv2: keep i.MX8MN gpumix bus clock enabled > soc: imx: gpcv2: Add dispmix and mipi domains to imx8mn > dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains > dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl > soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl > arm64: dts: imx8mn: add GPC node > arm64: dts: imx8mn: put USB controller into power-domains > arm64: dts: imx8mn: add DISP blk-ctrl > arm64: dts: imx8mn: Enable GPU The series introduces hard dependency between different branches. To ease the merge process, let's postpone the DTS patches to the next cycle. Shawn
