Re: [PATCH v4 1/2] SPI: Add SPI driver for Sunplus SP7021

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Dec 10, 2021 at 05:02:47PM +0800, Li-hao Kuo wrote:

> +static irqreturn_t sp7021_spi_sla_irq(int irq, void *dev)
> +{
> +	struct sp7021_spi_ctlr *pspim = dev;
> +	unsigned int data_status;
> +
> +	data_status = readl(pspim->sla_base + SP7021_DATA_RDY_REG);
> +	writel(data_status | SP7021_SLA_CLR_INT, pspim->sla_base + SP7021_DATA_RDY_REG);
> +	complete(&pspim->sla_isr);
> +	return IRQ_NONE;
> +}

This will always return IRQ_NONE even if the interrupt actually fired -
that should eventually cause genirq to complain that there's a problem
with the interrupt never being handled I think (though perhaps if the
interrupt stops asserting it'll pick up on that).  It should return
IRQ_HANDLED if there was something asserted in SP7021_DATA_RDY_REG.

Apart from that one thing this all looks good as far as I can see.

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux