Emulate the SMBus block read using ContinueXfer and SMBus using GPIO
interrupt.
For SMBus block read, the driver reads the first byte with ContinueXfer
set which will help to parse the data count and read the remaining bytes
without stop condition in between.
SMBus alert is implemented using external gpio interrupt.
Signed-off-by: Akhil R <akhilrajeev@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-tegra.c | 54 +++++++++++++++++++++++++++++++++++++++++-
1 file changed, 53 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index a5be8f0..3b70013 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -14,6 +14,7 @@
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -226,6 +227,11 @@ struct tegra_i2c_hw_feature {
bool has_interface_timing_reg;
};
+struct tegra_i2c_smbalert {
+ struct i2c_smbus_alert_setup alert_data;
+ struct i2c_client *ara;
+};
+
/**
* struct tegra_i2c_dev - per device I2C context
* @dev: device reference for power management
@@ -280,6 +286,8 @@ struct tegra_i2c_dev {
int msg_err;
u8 *msg_buf;
+ struct tegra_i2c_smbalert smbalert;
+
struct completion dma_complete;
struct dma_chan *tx_dma_chan;
struct dma_chan *rx_dma_chan;
@@ -1232,6 +1240,11 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
return err;
i2c_dev->msg_buf = msg->buf;
+
+ /* The condition true implies smbus block read and len is already read*/
+ if (msg->flags & I2C_M_RECV_LEN && end_state != MSG_END_CONTINUE)
+ i2c_dev->msg_buf = msg->buf + 1;
+
i2c_dev->msg_buf_remaining = msg->len;
i2c_dev->msg_err = I2C_ERR_NONE;
i2c_dev->msg_read = !!(msg->flags & I2C_M_RD);
@@ -1388,6 +1401,15 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
else
end_type = MSG_END_REPEAT_START;
}
+ /* If M_RECV_LEN use ContinueXfer to read the first byte */
+ if (msgs[i].flags & I2C_M_RECV_LEN) {
+ ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], MSG_END_CONTINUE);
+ if (ret)
+ break;
+ /* Set the read byte as msg len */
+ msgs[i].len = msgs[i].buf[0];
+ dev_dbg(i2c_dev->dev, "reading %d bytes\n", msgs[i].len);
+ }
ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], end_type);
if (ret)
break;
@@ -1415,7 +1437,8 @@ static u32 tegra_i2c_func(struct i2c_adapter *adap)
{
struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
u32 ret = I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
- I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING;
+ I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_10BIT_ADDR |
+ I2C_FUNC_PROTOCOL_MANGLING;
if (i2c_dev->hw->has_continue_xfer_support)
ret |= I2C_FUNC_NOSTART;
@@ -1727,6 +1750,29 @@ static int tegra_i2c_init_hardware(struct tegra_i2c_dev *i2c_dev)
return ret;
}
+static int tegra_i2c_setup_smbalert(struct tegra_i2c_dev *i2c_dev)
+{
+ struct tegra_i2c_smbalert *smbalert = &i2c_dev->smbalert;
+ struct gpio_desc *alert_gpiod;
+ struct i2c_client *ara;
+
+ alert_gpiod = devm_gpiod_get(i2c_dev->dev, "smbalert", GPIOD_IN);
+ if (IS_ERR(alert_gpiod))
+ return PTR_ERR(alert_gpiod);
+
+ smbalert->alert_data.irq = gpiod_to_irq(alert_gpiod);
+ if (smbalert->alert_data.irq <= 0)
+ return smbalert->alert_data.irq;
+
+ ara = i2c_new_smbus_alert_device(&i2c_dev->adapter, &smbalert->alert_data);
+ if (IS_ERR(ara))
+ return PTR_ERR(ara);
+
+ smbalert->ara = ara;
+
+ return 0;
+}
+
static int tegra_i2c_probe(struct platform_device *pdev)
{
struct tegra_i2c_dev *i2c_dev;
@@ -1821,6 +1867,12 @@ static int tegra_i2c_probe(struct platform_device *pdev)
if (err)
goto release_rpm;
+ if (device_property_read_bool(i2c_dev->dev, "smbus-alert")) {
+ err = tegra_i2c_setup_smbalert(i2c_dev);
+ if (err)
+ dev_warn(&pdev->dev, "smbus-alert setup failed: %d\n", err);
+ }
+
return 0;
release_rpm:
--
2.7.4
