> > > > diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt
> > > b/Documentation/devicetree/bindings/sound/fsl-sai.txt
> > > > index aed1f21..e25ef38 100644
> > > > --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt
> > > > +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt
> > > > @@ -20,9 +20,9 @@ Required properties:
> > > > See ../pinctrl/pinctrl-bindings.txt for details of the property
> values.
> > > > - big-endian: Boolean property, required if all the SAI device
> registers
> > > > are big-endian rather than little-endian.
> > > > -- big-endian-data: If this property is absent, the little endian mode
> will
> > > > - be in use as default, or the big endian mode will be in use for all
> the
> > > > - fifo data.
> > > > +- msb-first: Configures whether the LSB or the MSB is transmitted first
> for
> > > > + the fifo data. If this property is absent, the LSB is transmitted
> first
> > > as
> > > > + default, or the MSB is transmitted first.
> > > > - fsl,sai-synchronous-rx: This is a boolean property. If present,
> > > indicating
> > > > that SAI will work in the synchronous mode (sync Tx with Rx) which
> means
> > > > both the transimitter and receiver will send and receive data by
> > > following
> > > > @@ -53,5 +53,5 @@ sai2: sai@40031000 {
> > > > dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>,
> > > > <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>;
> > > > big-endian;
> > > > - big-endian-data;
> > > > + msb-first;
> > > > };
> > > > diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
> > > > index a6eb784..4e48431 100644
> > > > --- a/sound/soc/fsl/fsl_sai.c
> > > > +++ b/sound/soc/fsl/fsl_sai.c
> > > > @@ -175,7 +175,7 @@ static int fsl_sai_set_dai_fmt_tr(struct snd_soc_dai
> > > *cpu_dai,
> > > > bool tx = fsl_dir == FSL_FMT_TRANSMITTER;
> > > > u32 val_cr2 = 0, val_cr4 = 0;
> > > >
> > > > - if (!sai->big_endian_data)
> > > > + if (!sai->is_msb_first)
> > > > val_cr4 |= FSL_SAI_CR4_MF;
> > >
> > > IIRC, MF stands for 'MSB First' but the condition is !is_msb_first..
> > >
> >
> > Yes, I will fix this.
> >
> > > And also we can't not simply inverse the condition here since those
> > > platforms without the original 'big_endian_data' property will be
> > > broken unless they add the new 'is_msb_first' into the DT bindings,
> > > which is, however, a violation due to breaking the old bindings.
> > >
> > > So I guess is_lsb_first might be better here?
> > >
> > > And actually, Xiubo, what's your purpose to add this patch? I can't
> > > see any commit comments to explain the reason. So could you please
> > > say something about it?
> >
> > Months ago, the hardware team needed to do some IP test based LS1 needing
> > this to be added to the driver. And for now there is hasn't any other reason
> > for this yet.
>
> Hmm...the patch only renames big_endian_data to is_msb_first.
>
> So whatever the problem of LS1 is, this change doesn't matter to LS1
> at all unless LS1 has a specific property in its DT binding: If using
> is_msb_first works for LS1, using big_endian_data without applying
> this patch does work as well, doesn't it?
>
Yes.
> I think this patch is more likely making the binding explicit so that
> any platform like LS1 will not miss the essential property. Then the
> commit comments could have mentioned it if so.
>
> I'm looking forward to your new version. And I give you an extra info
> about SAI on i.MX. It should be configured as Little Endian and MSB
> first. So with the current DT binding it doesn't have big_endian*
> properties. Any replacement for big_endian_data shall be compatible
> to this case as well as I mentioned in the previous reply.
>
Fine.
Please wait.
BYW, how about other four patches of this patch series ? Do you have any
Comment here ?
BRs
Xiubo
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
