>-----Original Message----- >From: Linus Walleij <linus.walleij@xxxxxxxxxx> >Sent: Thursday, December 9, 2021 7:53 AM >To: D, Lakshmi Sowjanya <lakshmi.sowjanya.d@xxxxxxxxx> >Cc: linux-gpio@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; >bgolaszewski@xxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; >andriy.shevchenko@xxxxxxxxxxxxxxx; Saha, Tamal <tamal.saha@xxxxxxxxx>; N, >Pandith <pandith.n@xxxxxxxxx>; Demakkanavar, Kenchappa ><kenchappa.demakkanavar@xxxxxxxxx> >Subject: Re: [PATCH v2 1/2] dt-bindings: pinctrl: Add bindings for Intel >Thunderbay pinctrl driver > >Hi Lakshmi, > >On Wed, Dec 1, 2021 at 8:26 AM <lakshmi.sowjanya.d@xxxxxxxxx> wrote: > >> +patternProperties: >> + '^gpio@[0-9a-f]*$': >> + type: object >> + >> + description: >> + Child nodes can be specified to contain pin configuration information, >> + which can then be utilized by pinctrl client devices. >> + The following properties are supported. >> + >> + properties: >> + pins: >> + description: | >> + The name(s) of the pins to be configured in the child node. >> + Supported pin names are "GPIO0" up to "GPIO66". >> + >> + bias-disable: true >> + >> + bias-pull-down: true >> + >> + bias-pull-up: true >> + >> + drive-strength: >> + description: Drive strength for the pad. >> + enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15] >> + >> + bias-bus-hold: >> + type: boolean >> + >> + input-schmitt-enable: >> + type: boolean >> + >> + slew-rate: >> + description: GPIO slew rate control. >> + 0 - Slow >> + 1 - Fast >> + enum: [0, 1] >> + >> +additionalProperties: false > >Can't you reference >Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml >here? > >Look at for example: >Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml I can do that. Shall add it in the next version of patchset. Regards Lakshmi Sowjanya D > >Yours, >Linus Walleij
