From: Lakshmi Sowjanya D <lakshmi.sowjanya.d@xxxxxxxxx> Add Device Tree bindings documentation and an entry in MAINTAINERS file for Intel Thunder Bay SoC's pin controller. Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@xxxxxxxxx> --- .../pinctrl/intel,pinctrl-thunderbay.yaml | 119 ++++++++++++++++++ MAINTAINERS | 5 + 2 files changed, 124 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/intel,pinctrl-thunderbay.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-thunderbay.yaml b/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-thunderbay.yaml new file mode 100644 index 000000000000..0ec476248f21 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-thunderbay.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/intel,pinctrl-thunderbay.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Thunder Bay pin controller Device Tree Bindings + +maintainers: + - Lakshmi Sowjanya D <lakshmi.sowjanya.d@xxxxxxxxx> + +description: | + Intel Thunder Bay SoC integrates a pin controller which enables control + of pin directions, input/output values and configuration + for a total of 67 pins. + +properties: + compatible: + const: intel,thunderbay-pinctrl + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + gpio-ranges: + maxItems: 1 + + interrupts: + description: + Specifies the interrupt lines to be used by the controller. + maxItems: 2 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + +patternProperties: + '^gpio@[0-9a-f]*$': + type: object + + description: + Child nodes can be specified to contain pin configuration information, + which can then be utilized by pinctrl client devices. + The following properties are supported. + + properties: + pins: + description: | + The name(s) of the pins to be configured in the child node. + Supported pin names are "GPIO0" up to "GPIO66". + + bias-disable: true + + bias-pull-down: true + + bias-pull-up: true + + drive-strength: + description: Drive strength for the pad. + enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15] + + bias-bus-hold: + type: boolean + + input-schmitt-enable: + type: boolean + + slew-rate: + description: GPIO slew rate control. + 0 - Slow + 1 - Fast + enum: [0, 1] + +additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + - interrupts + - interrupt-controller + - '#interrupt-cells' + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + // Example 1 + pinctrl0: gpio@0 { + compatible = "intel,thunderbay-pinctrl"; + reg = <0x600b0000 0x88>; + gpio-controller; + #gpio-cells = <0x2>; + gpio-ranges = <&pinctrl0 0 0 67>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + // Example 2 + pinctrl1: gpio@1 { + compatible = "intel,thunderbay-pinctrl"; + reg = <0x600c0000 0x88>; + gpio-controller; + #gpio-cells = <0x2>; + gpio-ranges = <&pinctrl1 0 0 53>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 913856599623..3f633e777c48 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15128,6 +15128,11 @@ L: linux-omap@xxxxxxxxxxxxxxx S: Maintained F: drivers/pinctrl/pinctrl-single.c +PIN CONTROLLER - THUNDERBAY +M: Lakshmi Sowjanya D <lakshmi.sowjanya.d@xxxxxxxxx> +S: Supported +F: drivers/pinctrl/pinctrl-thunderbay.c + PKTCDVD DRIVER M: linux-block@xxxxxxxxxxxxxxx S: Orphan -- 2.17.1
