On Mon, 6 Dec 2021 at 21:25, Patrick Williams <patrick@xxxxxxxxx> wrote: > > On Wed, Dec 01, 2021 at 11:37:38AM +0800, Howard Chiu wrote: > > Initial introduction of Facebook Bletchley equipped with > > Aspeed 2600 BMC SoC. > > > > Signed-off-by: Howard Chiu <howard.chiu@xxxxxxxxxxxx> > > > > ... > > > Change since v2: > > - Remove uart5 workaround > > - Remove gpio nodes of pca9552/pca9539 > > - Modify gpio-line-name of led/power/presence pins with openbmc pattern > > A number of the GPIOs do not have defined openbmc patterns for them yet. The > names you have chosen are ok for now, but we will be changing them as we refine > development of this machine further. > > > + gpio-line-names = > > + "SLED0_MS_DETECT1","SLED0_VBUS_BMC_EN","SLED0_INA230_ALERT","SLED0_P12V_STBY_ALERT", > > + "SLED0_SSD_ALERT","SLED0_MS_DETECT0","SLED0_RST_CCG5","SLED0_FUSB302_INT", > > + "SLED0_MD_STBY_RESET","SLED0_MD_IOEXP_EN_FAULT","SLED0_MD_DIR","SLED0_MD_DECAY", > > + "SLED0_MD_MODE1","SLED0_MD_MODE2","SLED0_MD_MODE3","power-host0"; > > Such as these... > > > -- > > 2.25.1 > > > > Otherwise, > > Reviewed-by: Patrick Williams <patrick@xxxxxxxxx> Thanks for reviewing. Howard, I'm merging patches for v5.17 but I can't apply this until you fix the warnings I mentioned. Cheers, Jeol > > -- > Patrick Williams
