Provide dt-schema documentation for Exynos7885 SoC clock controller. Description is modified from Exynos850 clock controller documentation as I couldn't describe it any better, that was written by Sam Protsenko. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx> Signed-off-by: David Virag <virag.david003@xxxxxxxxx> --- Changes in v2: - Fixed double : in description - Added R-b tag by Krzysztof Kozlowski Changes in v3: - Nothing Changes in v4: - Fix leading 0x in example. .../clock/samsung,exynos7885-clock.yaml | 166 ++++++++++++++++++ 1 file changed, 166 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml new file mode 100644 index 000000000000..7e5a9cac2fd2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml @@ -0,0 +1,166 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynos7885-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos7885 SoC clock controller + +maintainers: + - Dávid Virág <virag.david003@xxxxxxxxx> + - Chanwoo Choi <cw00.choi@xxxxxxxxxxx> + - Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx> + - Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx> + - Tomasz Figa <tomasz.figa@xxxxxxxxx> + +description: | + Exynos7885 clock controller is comprised of several CMU units, generating + clocks for different domains. Those CMU units are modeled as separate device + tree nodes, and might depend on each other. The root clock in that root tree + is an external clock: OSCCLK (26 MHz). This external clock must be defined + as a fixed-rate clock in dts. + + CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and + dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP. + + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All clocks available for usage + in clock consumer nodes are defined as preprocessor macros in + 'dt-bindings/clock/exynos7885.h' header. + +properties: + compatible: + enum: + - samsung,exynos7885-cmu-top + - samsung,exynos7885-cmu-core + - samsung,exynos7885-cmu-peri + + clocks: + minItems: 1 + maxItems: 10 + + clock-names: + minItems: 1 + maxItems: 10 + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos7885-cmu-top + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + + clock-names: + items: + - const: oscclk + + - if: + properties: + compatible: + contains: + const: samsung,exynos7885-cmu-core + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_CORE bus clock (from CMU_TOP) + - description: CCI clock (from CMU_TOP) + - description: G3D clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_core_bus + - const: dout_core_cci + - const: dout_core_g3d + + - if: + properties: + compatible: + contains: + const: samsung,exynos7885-cmu-peri + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_PERI bus clock (from CMU_TOP) + - description: SPI0 clock (from CMU_TOP) + - description: SPI1 clock (from CMU_TOP) + - description: UART0 clock (from CMU_TOP) + - description: UART1 clock (from CMU_TOP) + - description: UART2 clock (from CMU_TOP) + - description: USI0 clock (from CMU_TOP) + - description: USI1 clock (from CMU_TOP) + - description: USI2 clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_peri_bus + - const: dout_peri_spi0 + - const: dout_peri_spi1 + - const: dout_peri_uart0 + - const: dout_peri_uart1 + - const: dout_peri_uart2 + - const: dout_peri_usi0 + - const: dout_peri_usi1 + - const: dout_peri_usi2 + +required: + - compatible + - "#clock-cells" + - clocks + - clock-names + - reg + +additionalProperties: false + +examples: + # Clock controller node for CMU_PERI + - | + #include <dt-bindings/clock/exynos7885.h> + + cmu_peri: clock-controller@10010000 { + compatible = "samsung,exynos7885-cmu-peri"; + reg = <0x10010000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>, + <&cmu_top CLK_DOUT_PERI_BUS>, + <&cmu_top CLK_DOUT_PERI_SPI0>, + <&cmu_top CLK_DOUT_PERI_SPI1>, + <&cmu_top CLK_DOUT_PERI_UART0>, + <&cmu_top CLK_DOUT_PERI_UART1>, + <&cmu_top CLK_DOUT_PERI_UART2>, + <&cmu_top CLK_DOUT_PERI_USI0>, + <&cmu_top CLK_DOUT_PERI_USI1>, + <&cmu_top CLK_DOUT_PERI_USI2>; + clock-names = "oscclk", + "dout_peri_bus", + "dout_peri_spi0", + "dout_peri_spi1", + "dout_peri_uart0", + "dout_peri_uart1", + "dout_peri_uart2", + "dout_peri_usi0", + "dout_peri_usi1", + "dout_peri_usi2"; + }; + +... -- 2.34.1
