While converting bindings to dtschema, the buck regulators lost
"op_mode" property. The "op_mode" is a valid property for all
regulators (both LDOs and bucks), so add it.
Reported-by: Rob Herring <robh@xxxxxxxxxx>
Fixes: fab58debc137 ("regulator: dt-bindings: samsung,s5m8767: convert to dtschema")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
---
.../bindings/regulator/samsung,s5m8767.yaml | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
index 80a63d47790a..c98929a213e9 100644
--- a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
+++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
@@ -51,6 +51,19 @@ patternProperties:
description:
Properties for single BUCK regulator.
+ properties:
+ op_mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 1
+ description: |
+ Describes the different operating modes of the regulator with power
+ mode change in SOC. The different possible values are:
+ 0 - always off mode
+ 1 - on in normal mode
+ 2 - low power mode
+ 3 - suspend mode
+
required:
- regulator-name
@@ -63,6 +76,18 @@ patternProperties:
Properties for single BUCK regulator.
properties:
+ op_mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 1
+ description: |
+ Describes the different operating modes of the regulator with power
+ mode change in SOC. The different possible values are:
+ 0 - always off mode
+ 1 - on in normal mode
+ 2 - low power mode
+ 3 - suspend mode
+
s5m8767,pmic-ext-control-gpios:
maxItems: 1
description: |
--
2.32.0
