Move the usb2_picophy1 and usb2_picophy2 nodes out of the soc section.
Since they are controlled via syscfg, there is no reg property needed,
which is required when having the node within the soc section.
Signed-off-by: Alain Volmat <avolmat@xxxxxx>
---
arch/arm/boot/dts/stih410.dtsi | 42 ++++++++++++++++------------------
1 file changed, 20 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index fe83d9a522bf..ce2f62cf129b 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -12,31 +12,29 @@ aliases {
bdisp0 = &bdisp0;
};
- soc {
- usb2_picophy1: phy2@0 {
- compatible = "st,stih407-usb2-phy";
- reg = <0 0>;
- #phy-cells = <0>;
- st,syscfg = <&syscfg_core 0xf8 0xf4>;
- resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
- <&picophyreset STIH407_PICOPHY0_RESET>;
- reset-names = "global", "port";
+ usb2_picophy1: phy2 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xf8 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY0_RESET>;
+ reset-names = "global", "port";
+
+ status = "disabled";
+ };
- status = "disabled";
- };
+ usb2_picophy2: phy3 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xfc 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY1_RESET>;
+ reset-names = "global", "port";
- usb2_picophy2: phy3@0 {
- compatible = "st,stih407-usb2-phy";
- reg = <0 0>;
- #phy-cells = <0>;
- st,syscfg = <&syscfg_core 0xfc 0xf4>;
- resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
- <&picophyreset STIH407_PICOPHY1_RESET>;
- reset-names = "global", "port";
-
- status = "disabled";
- };
+ status = "disabled";
+ };
+ soc {
ohci0: usb@9a03c00 {
compatible = "st,st-ohci-300x";
reg = <0x9a03c00 0x100>;
--
2.25.1
