Sergei
On 08/21/2014 01:29 PM, Sergei Shtylyov wrote:
> Hello.
>
> On 08/21/2014 10:19 PM, Dan Murphy wrote:
>
>> DRV2667 is a haptic/vibrator driver for Linear Resonant Actuators.
>> Adding dt binding for this part
>
>> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
>> ---
>> .../devicetree/bindings/input/ti,drv2667.txt | 18 ++++++++++++++++++
>> 1 file changed, 18 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/input/ti,drv2667.txt
>
>> diff --git a/Documentation/devicetree/bindings/input/ti,drv2667.txt b/Documentation/devicetree/bindings/input/ti,drv2667.txt
>> new file mode 100644
>> index 0000000..525216d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/input/ti,drv2667.txt
>> @@ -0,0 +1,18 @@
>> +Texas Instruments - drv2667 Haptics driver
>> +
>> +The drv2667 uses serial control bus communicates through I2C protocols
>
> I can't parse that.
>
Hmmm.. It made sense when I typed it. Will fix
>> +
>> +Required properties:
>> + - compatible - "ti,drv2667" - DRV2667
>> + - reg - I2C slave address
>> + - vbat-supply - Required supply regulator
>> +
>> +Example:
>> +
>> +drv2667: drv2667@59 {
>> + compatible = "ti,drv2667";
>> + reg = <0x59>;
>
> You say "vbat-supply" is mandatory, yet you don't have it in your example?
I will add this as well.
>
> WBR, Sergei
>
>
--
------------------
Dan Murphy
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
