Hello.
On 08/21/2014 10:19 PM, Dan Murphy wrote:
DRV2667 is a haptic/vibrator driver for Linear Resonant Actuators.
Adding dt binding for this part
Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---
.../devicetree/bindings/input/ti,drv2667.txt | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/ti,drv2667.txt
diff --git a/Documentation/devicetree/bindings/input/ti,drv2667.txt b/Documentation/devicetree/bindings/input/ti,drv2667.txt
new file mode 100644
index 0000000..525216d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,drv2667.txt
@@ -0,0 +1,18 @@
+Texas Instruments - drv2667 Haptics driver
+
+The drv2667 uses serial control bus communicates through I2C protocols
I can't parse that.
+
+Required properties:
+ - compatible - "ti,drv2667" - DRV2667
+ - reg - I2C slave address
+ - vbat-supply - Required supply regulator
+
+Example:
+
+drv2667: drv2667@59 {
+ compatible = "ti,drv2667";
+ reg = <0x59>;
You say "vbat-supply" is mandatory, yet you don't have it in your example?
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
