Add the p241 sound card support. This board can play audio through HDMI and the internal DAC. Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx> --- .../boot/dts/amlogic/meson-gxl-s805x-p241.dts | 70 +++++++++++++++++++ 1 file changed, 70 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts index 9d0684a8264b..ff906becd2ab 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts @@ -8,6 +8,7 @@ /dts-v1/; #include <dt-bindings/input/input.h> +#include <dt-bindings/sound/meson-aiu.h> #include "meson-gxl-s805x.dtsi" @@ -21,6 +22,13 @@ aliases { ethernet0 = ðmac; }; + au2: analog-amplifier { + compatible = "simple-audio-amplifier"; + sound-name-prefix = "AU2"; + VCC-supply = <&vcc_5v>; + enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -110,6 +118,68 @@ sdio_pwrseq: sdio-pwrseq { clocks = <&wifi32k>; clock-names = "ext_clock"; }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "GXL-P241"; + audio-aux-devs = <&au2>; + audio-widgets = "Line", "Lineout"; + audio-routing = "AU2 INL", "ACODEC LOLN", + "AU2 INR", "ACODEC LORN", + "Lineout", "AU2 OUTL", + "Lineout", "AU2 OUTR"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + + codec-1 { + sound-dai = <&aiu AIU_ACODEC CTRL_I2S>; + }; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + + dai-link-3 { + sound-dai = <&aiu AIU_ACODEC CTRL_OUT>; + + codec-0 { + sound-dai = <&acodec>; + }; + }; + }; +}; + +&acodec { + AVDD-supply = <&vddio_ao18>; + status = "okay"; +}; + +&aiu { + status = "okay"; }; &cec_AO { -- 2.34.0