Add the VCC_5V regulator, which feeds the HDMI, USB and audio amplifier.
Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
---
.../arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
index eb7f5a3fefd4..9d0684a8264b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
@@ -84,6 +84,14 @@ vcc_3v3: regulator-vcc_3v3 {
regulator-max-microvolt = <3300000>;
};
+ vcc_5v: regulator-vcc-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
@@ -136,6 +144,7 @@ &hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
+ hdmi-supply = <&vcc_5v>;
};
&hdmi_tx_tmds_port {
@@ -220,3 +229,7 @@ &usb {
status = "okay";
dr_mode = "host";
};
+
+&usb2_phy0 {
+ phy-supply = <&vcc_5v>;
+};
--
2.34.0
