Re: [PATCH v2 2/6] arm64: dts: xilinx: zynqmp: Add RPU subsystem device node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Nov 22, 2021 at 10:20:46PM -0800, Tanmay Shah wrote:
> RPU subsystem can be configured in cluster-mode or split mode.
> Also each r5 core has separate power domains.
> 
> Signed-off-by: Tanmay Shah <tanmay.shah@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> index 28dccb891a53..f4fb98ccb1b5 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> @@ -654,6 +654,23 @@ qspi: spi@ff0f0000 {
>  			power-domains = <&zynqmp_firmware PD_QSPI>;
>  		};
>  
> +		r5fss: r5fss@ff9a0000 {
> +			compatible = "xlnx,zynqmp-r5fss";
> +			xlnx,cluster-mode = <1>;
> +
> +                        reg = <0x0 0Xff9a0000 0x0 0x228>;

This line is giving me an obvious checkpatch warning.  Please make sure you run
checkpatch.pl before sending out a patchset.

> +
> +			r5f_core0: r5f-0 {
> +				compatible = "xlnx,zynqmp-r5f";
> +				power-domains = <&zynqmp_firmware PD_RPU_0>;
> +			};
> +
> +			r5f_core1: r5f-1 {
> +				compatible = "xlnx,zynqmp-r5f";
> +				power-domains = <&zynqmp_firmware PD_RPU_1>;
> +			};
> +		};
> +
>  		psgtr: phy@fd400000 {
>  			compatible = "xlnx,zynqmp-psgtr-v1.1";
>  			status = "disabled";
> -- 
> 2.25.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux