Add support for sc7280 CRD (Compute Reference Design) Board. It shares the same EC and H1 as the IDP2 boards, comes with an eDP display and supports both touch and trackpad. Since the EC and H1 nodes are identical across CRD and IDP2 this series also adds support for EC/H1 on IDP2 devices. Kshitiz Godara (2): arm64: dts: qcom: sc7280: Define EC and H1 nodes for IDP/CRD arm64: dts: qcom: sc7280-crd: Add Touchscreen and touchpad support Rajendra Nayak (2): dt-bindings: arm: qcom: Document qcom,sc7280-crd board arm64: dts: qcom: sc7280-crd: Add device tree files for CRD Documentation/devicetree/bindings/arm/qcom.yaml | 2 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sc7280-crd.dts | 93 +++++++++++++++++++++ arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi | 105 ++++++++++++++++++++++++ arch/arm64/boot/dts/qcom/sc7280-idp2.dts | 1 + 5 files changed, 202 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc7280-crd.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi -- 2.7.4
