Convert the Cadence MACB/GEM Ethernet controller Device Tree binding
documentation to json-schema.
Re-add "cdns,gem" (removed in commit a217d8711da5c87f ("dt-bindings:
Remove PicoXcell bindings")) as there are active users on non-PicoXcell
platforms.
Add missing "ether_clk" clock.
Add missing properties.
Signed-off-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/net/cdns,macb.yaml | 162 ++++++++++++++++++
.../devicetree/bindings/net/macb.txt | 60 -------
2 files changed, 162 insertions(+), 60 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/cdns,macb.yaml
delete mode 100644 Documentation/devicetree/bindings/net/macb.txt
diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml
new file mode 100644
index 0000000000000000..c7d00350430aa503
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/cdns,macb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence MACB/GEM Ethernet controller
+
+maintainers:
+ - Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
+ - Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - cdns,at91rm9200-emac # Atmel at91rm9200 SoC
+ - const: cdns,emac # Generic
+
+ - items:
+ - enum:
+ - cdns,zynq-gem # Xilinx Zynq-7xxx SoC
+ - cdns,zynqmp-gem # Xilinx Zynq Ultrascale+ MPSoC
+ - const: cdns,gem # Generic
+
+ - items:
+ - enum:
+ - cdns,at91sam9260-macb # Atmel at91sam9 SoCs
+ - cdns,sam9x60-macb # Microchip sam9x60 SoC
+ - const: cdns,macb # Generic
+
+ - items:
+ - enum:
+ - atmel,sama5d3-macb # 10/100Mbit IP on Atmel sama5d3 SoCs
+ - enum:
+ - cdns,at91sam9260-macb # Atmel at91sam9 SoCs.
+ - const: cdns,macb # Generic
+
+ - enum:
+ - atmel,sama5d29-gem # GEM XL IP (10/100) on Atmel sama5d29 SoCs
+ - atmel,sama5d2-gem # GEM IP (10/100) on Atmel sama5d2 SoCs
+ - atmel,sama5d3-gem # Gigabit IP on Atmel sama5d3 SoCs
+ - atmel,sama5d4-gem # GEM IP (10/100) on Atmel sama5d4 SoCs
+ - cdns,at32ap7000-macb # Other 10/100 usage or use the generic form
+ - cdns,np4-macb # NP4 SoC devices
+ - microchip,sama7g5-emac # Microchip SAMA7G5 ethernet interface
+ - microchip,sama7g5-gem # Microchip SAMA7G5 gigabit ethernet interface
+ - sifive,fu540-c000-gem # SiFive FU540-C000 SoC
+ - cdns,emac # Generic
+ - cdns,gem # Generic
+ - cdns,macb # Generic
+
+ reg:
+ minItems: 1
+ items:
+ - description: Basic register set
+ - description: GEMGXL Management block registers on SiFive FU540-C000 SoC
+
+ interrupts:
+ minItems: 1
+ maxItems: 8
+ description: One interrupt per available hardware queue
+
+ clocks:
+ minItems: 1
+ maxItems: 5
+
+ clock-names:
+ minItems: 1
+ items:
+ - enum: [ ether_clk, hclk, pclk ]
+ - enum: [ hclk, pclk ]
+ - const: tx_clk
+ - enum: [ rx_clk, tsu_clk ]
+ - const: tsu_clk
+
+ local-mac-address: true
+
+ phy-mode: true
+
+ phy-handle: true
+
+ fixed-link: true
+
+ iommus:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ '#stream-id-cells':
+ const: 1
+
+ mdio:
+ type: object
+ description:
+ Node containing PHY children. If this node is not present, then PHYs will
+ be direct children.
+
+patternProperties:
+ "^ethernet-phy@[0-9a-f]$":
+ type: object
+ $ref: ethernet-phy.yaml#
+
+ properties:
+ reset-gpios: true
+
+ magic-packet:
+ description:
+ Indicates that the hardware supports waking up via magic packet.
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - phy-mode
+
+allOf:
+ - $ref: ethernet-controller.yaml#
+
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ const: sifive,fu540-c000-gem
+ then:
+ properties:
+ reg:
+ maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ macb0: ethernet@fffc4000 {
+ compatible = "cdns,at32ap7000-macb";
+ reg = <0xfffc4000 0x4000>;
+ interrupts = <21>;
+ phy-mode = "rmii";
+ local-mac-address = [3a 0e 03 04 05 06];
+ clock-names = "pclk", "hclk", "tx_clk";
+ clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@1 {
+ reg = <0x1>;
+ reset-gpios = <&pioE 6 1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
deleted file mode 100644
index a1b06fd1962e4d93..0000000000000000
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-* Cadence MACB/GEM Ethernet controller
-
-Required properties:
-- compatible: Should be "cdns,[<chip>-]{macb|gem}"
- Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
- Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs.
- Use "cdns,sam9x60-macb" for Microchip sam9x60 SoC.
- Use "cdns,np4-macb" for NP4 SoC devices.
- Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
- Use "atmel,sama5d2-gem" for the GEM IP (10/100) available on Atmel sama5d2 SoCs.
- Use "atmel,sama5d29-gem" for GEM XL IP (10/100) available on Atmel sama5d29 SoCs.
- Use "atmel,sama5d3-macb" for the 10/100Mbit IP available on Atmel sama5d3 SoCs.
- Use "atmel,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs.
- Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs.
- Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.
- Use "cdns,zynqmp-gem" for Zynq Ultrascale+ MPSoC.
- Use "sifive,fu540-c000-gem" for SiFive FU540-C000 SoC.
- Use "microchip,sama7g5-emac" for Microchip SAMA7G5 ethernet interface.
- Use "microchip,sama7g5-gem" for Microchip SAMA7G5 gigabit ethernet interface.
- Or the generic form: "cdns,emac".
-- reg: Address and length of the register set for the device
- For "sifive,fu540-c000-gem", second range is required to specify the
- address and length of the registers for GEMGXL Management block.
-- interrupts: Should contain macb interrupt
-- phy-mode: See ethernet.txt file in the same directory.
-- clock-names: Tuple listing input clock names.
- Required elements: 'pclk', 'hclk'
- Optional elements: 'tx_clk'
- Optional elements: 'rx_clk' applies to cdns,zynqmp-gem
- Optional elements: 'tsu_clk'
-- clocks: Phandles to input clocks.
-
-Optional properties:
-- mdio: node containing PHY children. If this node is not present, then PHYs
- will be direct children.
-
-The MAC address will be determined using the optional properties
-defined in ethernet.txt.
-
-Optional properties for PHY child node:
-- reset-gpios : Should specify the gpio for phy reset
-- magic-packet : If present, indicates that the hardware supports waking
- up via magic packet.
-- phy-handle : see ethernet.txt file in the same directory
-
-Examples:
-
- macb0: ethernet@fffc4000 {
- compatible = "cdns,at32ap7000-macb";
- reg = <0xfffc4000 0x4000>;
- interrupts = <21>;
- phy-mode = "rmii";
- local-mac-address = [3a 0e 03 04 05 06];
- clock-names = "pclk", "hclk", "tx_clk";
- clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
- ethernet-phy@1 {
- reg = <0x1>;
- reset-gpios = <&pioE 6 1>;
- };
- };
--
2.25.1
