Adding USB2 controller and phy nodes for SC7280 SKU1 board.
Signed-off-by: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7280-idp.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 9b991ba..ffd483d 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -80,3 +80,19 @@
qcom,pre-scaling = <1 1>;
};
};
+
+&usb_2 {
+ status = "okay";
+};
+
+&usb_2_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_2_hsphy {
+ status = "okay";
+
+ vdda-pll-supply = <&vreg_l10c_0p8>;
+ vdda33-supply = <&vreg_l2b_3p0>;
+ vdda18-supply = <&vreg_l1c_1p8>;
+};
--
2.7.4
