All M1 Mac devices have 2 SoC connected USB-C ports and use cd321x USB
type C port switch and power deliver controllers. I2c bus and addresses
configuration are for all devices equal.
The iMac (24-inch, 2021) has a configuration with 2 additional USB-C
ports (j456) using two addiotional cd321x controllers.
Signed-off-by: Janne Grunau <j@xxxxxxxxxx>
Reviewed-by: Sven Peter <sven@xxxxxxxxxxxxx>
---
- fixed typo in commit message
- renamed cd321x nodes to "usb-pd"
- added Reviewed-by tag
arch/arm64/boot/dts/apple/t8103-j456.dts | 18 ++++++++++++++++++
arch/arm64/boot/dts/apple/t8103-jxxx.dtsi | 18 ++++++++++++++++++
2 files changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/apple/t8103-j456.dts b/arch/arm64/boot/dts/apple/t8103-j456.dts
index 7267e069355b..884fddf7d363 100644
--- a/arch/arm64/boot/dts/apple/t8103-j456.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j456.dts
@@ -21,6 +21,24 @@ aliases {
};
};
+&i2c0 {
+ hpm2: usb-pd@3b {
+ compatible = "apple,cd321x";
+ reg = <0x3b>;
+ interrupt-parent = <&pinctrl_ap>;
+ interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "irq";
+ };
+
+ hpm3: usb-pd@3c {
+ compatible = "apple,cd321x";
+ reg = <0x3c>;
+ interrupt-parent = <&pinctrl_ap>;
+ interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "irq";
+ };
+};
+
/*
* Force the bus number assignments so that we can declare some of the
* on-board devices and properties that are populated by the bootloader
diff --git a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
index 53d22b434d76..876278fe0afe 100644
--- a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
@@ -39,6 +39,24 @@ &serial0 {
status = "okay";
};
+&i2c0 {
+ hpm0: usb-pd@38 {
+ compatible = "apple,cd321x";
+ reg = <0x38>;
+ interrupt-parent = <&pinctrl_ap>;
+ interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "irq";
+ };
+
+ hpm1: usb-pd@3f {
+ compatible = "apple,cd321x";
+ reg = <0x3f>;
+ interrupt-parent = <&pinctrl_ap>;
+ interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "irq";
+ };
+};
+
/*
* Force the bus number assignments so that we can declare some of the
* on-board devices and properties that are populated by the bootloader
--
2.34.0
