Re: [PATCH] of/irq: Add a quirk for controllers with their own definition of interrupt-map

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 23 Nov 2021 08:44:19 +0000,
Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
> 
> Hi Marc,
> 
> On Tue, Nov 23, 2021 at 9:33 AM Marc Zyngier <maz@xxxxxxxxxx> wrote:
> > On Tue, 23 Nov 2021 07:57:48 +0000,
> > Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
> > > Summarized:
> > >   - Before the bad commit, and after your fix, irqc-rza1 is invoked,
> > >     and the number of interrupts seen is correct, but input events
> > >     are doubled.
> > >   - After the bad commit, irqc-rza1 is not invoked, and there is an
> > >     interrupt storm, but input events are OK.
> >
> > OK, that's reassuring, even if the "twice the events" stuff isn't what
> > you'd expect. We at least know this is a separate issue, and that this
> > patch on top of -rc1 brings you back to the 5.15 behaviour.
> >
> > I'd expect it to be the case for the other platforms as well.
> 
> OK.
> 
> BTW, what would have been the correct way to do this for irqc-rza1?
> I think we're about to make the same mistake with RZ/G2L IRQC
> support[1]?

Indeed, and I was about to look into it.

There are multiple ways to skin this cat, including renaming
'interrupt-map' to 'my-own-private-interrupt-map'. Or use something
akin the new 'msi-range' (which we could call interrupt-range), and
replace:

  interrupt-map = <0 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
                  <1 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
                  <2 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
                  <3 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
                  <4 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
                  <5 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
                  <6 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
                  <7 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;

with:

  interrupt-range = <&gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0 8>;

which reads as "base interrupt spec", "start pin", "count".  This
gives you almost the same level of information, and doesn't interfere
with the rest of the DT properties. Parsing it is also much simpler.
But that's up to you, really.

	M.

-- 
Without deviation from the norm, progress is not possible.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux