On Wed, Nov 03, 2021 at 12:56:17PM +0100, Matthias Schiffer wrote:
> The TQMa6x "a" has a workaround for ERR006687 implemented in hardware.
> Add the required pinmuxing and related setup to make use of this.
>
> As board DTS files based on the TQMa6x SoMs will define their own
> pinmuxing for the FEC ethernet controller as well, we can't apply this
> pin group unconditionally; instead, it is the responsibility of the
> board DTs derived from imx6qdl-tqma6a.dtsi to include this group.
>
> Signed-off-by: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
"ARM: dts: imx6qdl-tqma6: ..." for subject prefix.
Shawn
> ---
>
> v2: no changes
>
> arch/arm/boot/dts/imx6qdl-tqma6a.dtsi | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
> index b679bec78e6c..bfb67da64b96 100644
> --- a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
> @@ -4,6 +4,12 @@
> * Copyright 2013-2017 Markus Niebel <Markus.Niebel@xxxxxxxxxxxx>
> */
>
> +&fec {
> + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
> + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
> + fsl,err006687-workaround-present;
> +};
> +
> &i2c1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_i2c1>;
> @@ -26,3 +32,17 @@
> pagesize = <32>;
> };
> };
> +
> +&iomuxc {
> + /*
> + * This pinmuxing is required for the ERR006687 workaround. Board
> + * DTS files that enable the FEC controller with
> + * fsl,err006687-workaround-present must include this group.
> + */
> + pinctrl_enet_fix: enetfixgrp {
> + fsl,pins = <
> + /* ENET ping patch */
> + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
> + >;
> + };
> +};
> --
> 2.17.1
>
