On Wed, Nov 03, 2021 at 12:56:18PM +0100, Matthias Schiffer wrote:
> From: Markus Niebel <Markus.Niebel@xxxxxxxxxxxxxxx>
>
> Add device trees for the MBa6x mainboard with TQMa6Q/QP/DL SoMs.
>
> As discussed, all new files are added with GPL-2.0-only license, as they
> are too tightly intertwined with the SoC DTSIs imx6dl.dtsi and imx6q.dtsi,
> which are GPL-2.0.
>
> Signed-off-by: Markus Niebel <Markus.Niebel@xxxxxxxxxxxxxxx>
> Signed-off-by: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
> ---
>
> v2: changed SPDX-License-Identifier of new files to GPL-2.0-only as
> suggested by Rob Herring.
>
>
> arch/arm/boot/dts/Makefile | 5 +
> arch/arm/boot/dts/imx6dl-mba6.dtsi | 22 ++
> arch/arm/boot/dts/imx6dl-mba6a.dts | 21 ++
> arch/arm/boot/dts/imx6dl-mba6b.dts | 21 ++
> arch/arm/boot/dts/imx6q-mba6.dtsi | 44 +++
> arch/arm/boot/dts/imx6q-mba6a.dts | 20 +
> arch/arm/boot/dts/imx6q-mba6b.dts | 20 +
> arch/arm/boot/dts/imx6qdl-mba6.dtsi | 528 +++++++++++++++++++++++++++
> arch/arm/boot/dts/imx6qdl-mba6a.dtsi | 36 ++
> arch/arm/boot/dts/imx6qdl-mba6b.dtsi | 52 +++
> arch/arm/boot/dts/imx6qp-mba6b.dts | 18 +
> 11 files changed, 787 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx6dl-mba6.dtsi
> create mode 100644 arch/arm/boot/dts/imx6dl-mba6a.dts
> create mode 100644 arch/arm/boot/dts/imx6dl-mba6b.dts
> create mode 100644 arch/arm/boot/dts/imx6q-mba6.dtsi
> create mode 100644 arch/arm/boot/dts/imx6q-mba6a.dts
> create mode 100644 arch/arm/boot/dts/imx6q-mba6b.dts
> create mode 100644 arch/arm/boot/dts/imx6qdl-mba6.dtsi
> create mode 100644 arch/arm/boot/dts/imx6qdl-mba6a.dtsi
> create mode 100644 arch/arm/boot/dts/imx6qdl-mba6b.dtsi
> create mode 100644 arch/arm/boot/dts/imx6qp-mba6b.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 0de64f237cd8..ef7a8054ef35 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -483,6 +483,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
> imx6dl-icore-rqs.dtb \
> imx6dl-lanmcu.dtb \
> imx6dl-mamoj.dtb \
> + imx6dl-mba6a.dtb \
> + imx6dl-mba6b.dtb \
> imx6dl-nit6xlite.dtb \
> imx6dl-nitrogen6x.dtb \
> imx6dl-phytec-mira-rdk-nand.dtb \
> @@ -584,6 +586,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
> imx6q-kp-tpc.dtb \
> imx6q-logicpd.dtb \
> imx6q-marsboard.dtb \
> + imx6q-mba6a.dtb \
> + imx6q-mba6b.dtb \
> imx6q-mccmon6.dtb \
> imx6q-nitrogen6x.dtb \
> imx6q-nitrogen6_max.dtb \
> @@ -629,6 +633,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
> imx6q-wandboard-revb1.dtb \
> imx6q-wandboard-revd1.dtb \
> imx6q-zii-rdu2.dtb \
> + imx6qp-mba6b.dtb \
> imx6qp-nitrogen6_max.dtb \
> imx6qp-nitrogen6_som2.dtb \
> imx6qp-phytec-mira-rdk-nand.dtb \
> diff --git a/arch/arm/boot/dts/imx6dl-mba6.dtsi b/arch/arm/boot/dts/imx6dl-mba6.dtsi
> new file mode 100644
> index 000000000000..b749b424bbd6
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-mba6.dtsi
> @@ -0,0 +1,22 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright 2013 Sascha Hauer, Pengutronix
> + *
> + * Copyright 2013-2021 TQ-Systems GmbH
> + * Author: Markus Niebel <Markus.Niebel@xxxxxxxxxxxx>
> + */
> +
> +ðphy {
> + rxdv-skew-ps = <180>;
> + txen-skew-ps = <0>;
> + rxd3-skew-ps = <180>;
> + rxd2-skew-ps = <180>;
> + rxd1-skew-ps = <180>;
> + rxd0-skew-ps = <180>;
> + txd3-skew-ps = <120>;
> + txd2-skew-ps = <0>;
> + txd1-skew-ps = <300>;
> + txd0-skew-ps = <120>;
> + txc-skew-ps = <1860>;
> + rxc-skew-ps = <1860>;
> +};
> diff --git a/arch/arm/boot/dts/imx6dl-mba6a.dts b/arch/arm/boot/dts/imx6dl-mba6a.dts
> new file mode 100644
> index 000000000000..df0a96b28af0
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-mba6a.dts
> @@ -0,0 +1,21 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright 2013 Sascha Hauer, Pengutronix
> + *
> + * Copyright 2013-2021 TQ-Systems GmbH
> + * Author: Markus Niebel <Markus.Niebel@xxxxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include "imx6dl-tqma6a.dtsi"
> +#include "imx6qdl-mba6.dtsi"
> +#include "imx6qdl-mba6a.dtsi"
> +#include "imx6dl-mba6.dtsi"
> +
> +/ {
> + model = "TQ TQMa6S/DL on MBa6x";
> + compatible = "tq,imx6dl-mba6x-a", "tq,mba6a",
> + "tq,imx6dl-tqma6dl-a", "fsl,imx6dl";
> +};
> diff --git a/arch/arm/boot/dts/imx6dl-mba6b.dts b/arch/arm/boot/dts/imx6dl-mba6b.dts
> new file mode 100644
> index 000000000000..610b19d2db0f
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-mba6b.dts
> @@ -0,0 +1,21 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright 2013 Sascha Hauer, Pengutronix
> + *
> + * Copyright 2013-2021 TQ-Systems GmbH
> + * Author: Markus Niebel <Markus.Niebel@xxxxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include "imx6dl-tqma6b.dtsi"
> +#include "imx6qdl-mba6.dtsi"
> +#include "imx6qdl-mba6b.dtsi"
> +#include "imx6dl-mba6.dtsi"
> +
> +/ {
> + model = "TQ TQMa6S/DL on MBa6x";
> + compatible = "tq,imx6dl-mba6x-b", "tq,mba6b",
> + "tq,imx6dl-tqma6dl-b", "fsl,imx6dl";
> +};
> diff --git a/arch/arm/boot/dts/imx6q-mba6.dtsi b/arch/arm/boot/dts/imx6q-mba6.dtsi
> new file mode 100644
> index 000000000000..0d7be4567291
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-mba6.dtsi
> @@ -0,0 +1,44 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright 2013 Sascha Hauer, Pengutronix
> + *
> + * Copyright 2013-2021 TQ-Systems GmbH
> + * Author: Markus Niebel <Markus.Niebel@xxxxxxxxxxxx>
> + */
> +
> +&ecspi5 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi5_mba6x>;
> + cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
> +};
> +
> +ðphy {
> + rxdv-skew-ps = <180>;
> + txen-skew-ps = <120>;
> + rxd3-skew-ps = <180>;
> + rxd2-skew-ps = <180>;
> + rxd1-skew-ps = <180>;
> + rxd0-skew-ps = <180>;
> + txd3-skew-ps = <120>;
> + txd2-skew-ps = <0>;
> + txd1-skew-ps = <180>;
> + txd0-skew-ps = <360>;
> + txc-skew-ps = <1860>;
> + rxc-skew-ps = <1860>;
> +};
> +
> +&sata {
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl_ecspi5_mba6x: ecspi5grp-mba6x {
> + fsl,pins = <
> + /* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */
> + MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b099
> + MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0xb099
> + MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0xb099
> + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0xb099 /* eCSPI5 SS0 */
> + >;
> + };
> +};
> diff --git a/arch/arm/boot/dts/imx6q-mba6a.dts b/arch/arm/boot/dts/imx6q-mba6a.dts
> new file mode 100644
> index 000000000000..349a08605a5e
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-mba6a.dts
> @@ -0,0 +1,20 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright 2013 Sascha Hauer, Pengutronix
> + *
> + * Copyright 2013-2021 TQ-Systems GmbH
> + * Author: Markus Niebel <Markus.Niebel@xxxxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include "imx6q-tqma6a.dtsi"
> +#include "imx6qdl-mba6.dtsi"
> +#include "imx6qdl-mba6a.dtsi"
> +#include "imx6q-mba6.dtsi"
> +
> +/ {
> + model = "TQ TQMa6Q on MBa6x";
> + compatible = "tq,imx6q-mba6x-a", "tq,mba6a",
> + "tq,imx6q-tqma6q-a", "fsl,imx6q";
> +};
> diff --git a/arch/arm/boot/dts/imx6q-mba6b.dts b/arch/arm/boot/dts/imx6q-mba6b.dts
> new file mode 100644
> index 000000000000..02c9f3e91b8f
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-mba6b.dts
> @@ -0,0 +1,20 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright 2013 Sascha Hauer, Pengutronix
> + *
> + * Copyright 2013-2021 TQ-Systems GmbH
> + * Author: Markus Niebel <Markus.Niebel@xxxxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include "imx6q-tqma6b.dtsi"
> +#include "imx6qdl-mba6.dtsi"
> +#include "imx6qdl-mba6b.dtsi"
> +#include "imx6q-mba6.dtsi"
> +
> +/ {
> + model = "TQ TQMa6Q on MBa6x";
> + compatible = "tq,imx6q-mba6x-b", "tq,mba6b",
> + "tq,imx6q-tqma6q-b", "fsl,imx6q";
> +};
> diff --git a/arch/arm/boot/dts/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/imx6qdl-mba6.dtsi
> new file mode 100644
> index 000000000000..86e0433e41bc
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6qdl-mba6.dtsi
> @@ -0,0 +1,528 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright 2013 Sascha Hauer, Pengutronix
> + *
> + * Copyright 2013-2021 TQ-Systems GmbH
> + * Author: Markus Niebel <Markus.Niebel@xxxxxxxxxxxx>
> + */
> +
> +#include <dt-bindings/clock/imx6qdl-clock.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/sound/fsl-imx-audmux.h>
> +
> +/ {
> + aliases {
> + mmc0 = &usdhc3;
> + mmc1 = &usdhc2;
> + /delete-property/ mmc2;
> + /delete-property/ mmc3;
> + };
> +
> + chosen {
> + linux,stdout-path = &uart2;
linux,stdout-path is deprecated.
> + stdout-path = &uart2;
> + };
> +
> + beeper: gpio-beeper {
> + compatible = "gpio-beeper";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpiobeeper>;
> + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
> + status = "okay";
We use "okay" status to flip the device that is disabled by default in
<soc>.dtsi.
> + };
> +
> + gpio_buttons: gpio-buttons {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpiobuttons>;
> +
> + button1 {
> + label = "s6";
> + linux,code = <64>; /* KEY_F6 */
Include <dt-bindings/input/input.h>, and you will be able to use those
key constants and save the comment.
> + gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
> + };
> +
> + button2 {
> + label = "s7";
> + linux,code = <65>; /* KEY_F7 */
> + gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
> + };
> +
> + button3 {
> + label = "s8";
> + linux,code = <66>; /* KEY_F8 */
> + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpioled>;
> + status = "okay";
Unnecessary "okay" status.
Shawn
> +
> + led1 {
> + label = "led1";
> + gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "default-on";
> + };
> +
> + led2 {
> + label = "led2";
> + gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +
> + reg_mba6_3p3v: regulator-mba6-3p3v {
> + compatible = "regulator-fixed";
> + regulator-name = "supply-mba6-3p3v";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + reg_pcie: regulator-pcie {
> + compatible = "regulator-fixed";
> + regulator-name = "supply-pcie";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + /* PCIE.PWR_EN */
> + gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + regulator-always-on;
> + vin-supply = <®_mba6_3p3v>;
> + };
> +
> + reg_vcc3v3_audio: regulator-vcc3v3-audio {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3-audio";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <®_mba6_3p3v>;
> + };
> +
> + sound {
> + compatible = "fsl,imx-audio-tlv320aic32x4";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_audmux>;
> + model = "imx-audio-tlv320aic32x4";
> + ssi-controller = <&ssi1>;
> + audio-codec = <&tlv320aic32x4>;
> + audio-asrc = <&asrc>;
> + audio-routing =
> + "IN3_L", "Mic Jack",
> + "Mic Jack", "Mic Bias",
> + "IN1_L", "Line In Jack",
> + "IN1_R", "Line In Jack",
> + "Line Out Jack", "LOL",
> + "Line Out Jack", "LOR";
> + mux-int-port = <1>;
> + mux-ext-port = <3>;
> + };
> +};
> +
> +&audmux {
> + status = "okay";
> +
> + ssi0 {
> + fsl,audmux-port = <MX31_AUDMUX_PORT1_SSI0>;
> + fsl,port-config = <
> + (IMX_AUDMUX_V2_PTCR_SYN |
> + IMX_AUDMUX_V2_PTCR_TFSDIR |
> + IMX_AUDMUX_V2_PTCR_TFSEL(MX31_AUDMUX_PORT3_SSI_PINS_3) |
> + IMX_AUDMUX_V2_PTCR_TCLKDIR |
> + IMX_AUDMUX_V2_PTCR_TCSEL(MX31_AUDMUX_PORT3_SSI_PINS_3))
> + IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT3_SSI_PINS_3)
> + >;
> + };
> +
> + aud3 {
> + fsl,audmux-port = <MX31_AUDMUX_PORT3_SSI_PINS_3>;
> + fsl,port-config = <
> + IMX_AUDMUX_V2_PTCR_SYN
> + IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT1_SSI0)
> + >;
> + };
> +};
> +
> +&can1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_can1>;
> + status = "okay";
> +};
> +
> +&can2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_can2>;
> + status = "okay";
> +};
> +
> +&ecspi1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_mba6>;
> + cs-gpios = <&gpio3 19 0>, <&gpio3 24 0>;
> +};
> +
> +&fec {
> + phy-mode = "rgmii-id";
> + phy-handle = <ðphy>;
> + mac-address = [00 00 00 00 00 00];
> + status = "okay";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy: ethernet-phy@3 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <3>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
> + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
> + reset-assert-us = <1000>;
> + reset-deassert-us = <100000>;
> + micrel,force-master;
> + max-speed = <1000>;
> + };
> + };
> +};
> +
> +&i2c1 {
> + tlv320aic32x4: codec@18 {
audio-codec for node name.
> + compatible = "ti,tlv320aic32x4";
> + reg = <0x18>;
> + clocks = <&clks IMX6QDL_CLK_CKO>;
> + clock-names = "mclk";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_codec>;
> + ldoin-supply = <®_vcc3v3_audio>;
> + iov-supply = <®_mba6_3p3v>;
> + };
> +};
> +
> +&pcie {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcie>;
> + reset-gpio = <&gpio6 7 GPIO_ACTIVE_LOW>;
> + status = "okay";
> +};
> +
> +&pwm1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm1>;
> + status = "okay";
> +};
> +
> +&pwm3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm3>;
> + status = "okay";
> +};
> +
> +&pwm4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm4>;
> + status = "okay";
> +};
> +
> +&snvs_poweroff {
> + status = "okay";
> +};
> +
> +&ssi1 {
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + status = "okay";
> +};
> +
> +
> +&uart3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart3>;
> + uart-has-rtscts;
> + status = "okay";
> +};
> +
> +&uart4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart4>;
> + uart-has-rtscts;
> + linux,rs485-enabled-at-boot-time;
> + rs485-rts-active-low;
> + rs485-rx-during-tx;
> + status = "okay";
> +};
> +
> +&uart5 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart5>;
> + uart-has-rtscts;
> + status = "okay";
> +};
> +
> +&usbh1 {
> + disable-over-current;
> + status = "okay";
> +};
> +
> +&usbotg {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg>;
> + power-active-high;
> + over-current-active-low;
> + srp-disable;
> + hnp-disable;
> + adp-disable;
> + dr_mode = "otg";
> + status = "okay";
> +};
> +
> +/* SD card slot */
> +&usdhc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc2>;
> + vmmc-supply = <®_mba6_3p3v>;
> + bus-width = <4>;
> + no-1-8-v;
> + no-mmc;
> + no-sdio;
> + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
> + wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
> + status = "okay";
> +};
> +
> +&wdog1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdog1>;
> + /* does not work on unmodified starter kit */
> + /* fsl,ext-reset-output; */
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog>;
> +
> + pinctrl_audmux: audmuxgrp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
> + >;
> + };
> +
> + pinctrl_can1: can1grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0xb099
> + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0xb099
> + >;
> + };
> +
> + pinctrl_can2: can2grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0xb099
> + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0xb099
> + >;
> + };
> +
> + pinctrl_codec: codecgrp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0xb0 /* CLK */
> + >;
> + };
> +
> + pinctrl_ecspi1_mba6: ecspimba6grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D24__GPIO3_IO24 0xb099 /* eCSPI1 SS2 */
> + >;
> + };
> +
> + pinctrl_enet: enetgrp {
> + fsl,pins = <
> + /* FEC phy IRQ */
> + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x00011008
> + /* FEC phy reset */
> + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b099
> + /* DSE = 100, 100k up, SPEED = MED */
> + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0xb0a0
> + MX6QDL_PAD_ENET_MDC__ENET_MDC 0xb0a0
> + /* DSE = 111, pull 100k up */
> + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0xb038
> + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0xb038
> + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0xb038
> + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0xb038
> + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0xb038
> + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0xb038
> + /* DSE = 111, pull external */
> + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x0038
> + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x0038
> + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x0038
> + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x0038
> + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x0038
> + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x0038
> + /* HYS = 1, DSE = 111, 100k up, SPEED = HIGH */
> + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0f0
> + >;
> + };
> +
> + pinctrl_gpiobeeper: gpiobeepergrp {
> + fsl,pins = <
> + MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0xb099
> + >;
> + };
> +
> + pinctrl_gpiobuttons: gpiobuttongrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0001b099
> + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b099
> + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b099
> + >;
> + };
> +
> + pinctrl_gpioled: gpioledgrp {
> + fsl,pins = <
> + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0xb099 /* LED V15 */
> + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb099 /* LED V16 */
> + >;
> + };
> +
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + /* LCD.CONTRAST -> Rev 0100 only, not used on Rev.0200*/
> + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099
> +
> + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099
> + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b099
> + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b099
> +
> + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b099
> + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x0001b099
> + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x0001b099
> + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x0001b099
> + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x0001b099
> + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x0001b099
> + MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x0001b099
> +
> + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x0001b099
> + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x0001b099
> + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x0001b099
> + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0001b099
> + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x0001b099
> +
> + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b099
> + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x0001b099
> + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x0001b099
> + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x0001b099
> +
> + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x0001b099
> + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x0001b099
> + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x0001b099
> +
> + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b099
> + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x0001b099
> + >;
> + };
> +
> + pinctrl_pcie: pciegrp {
> + fsl,pins = <
> + /* HYS = 1, DSE = 110, 100k up, SPEED = HIGH (11)*/
> + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x001b0f0 /* #PCIE.WAKE */
> + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x001b0f0 /* #PCIE.RST */
> + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x001b0f0 /* #PCIE.DIS */
> + /* HYS = 1, DSE = 110, PUE+PKE, SPEED = HIGH (11)*/
> + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00130f0 /* PCIE.PWR_EN */
> + >;
> + };
> +
> + pinctrl_pwm1: pwm1grp {
> + fsl,pins = <
> + /* 100 k PD, DSE 120 OHM, SPPEED LO */
> + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x00003050
> + >;
> + };
> +
> + pinctrl_pwm3: pwm3grp {
> + fsl,pins = <
> + /* 100 k PD, DSE 120 OHM, SPPEED LO */
> + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x00003050
> + >;
> + };
> +
> + pinctrl_pwm4: pwm4grp {
> + fsl,pins = <
> + /* 100 k PD, DSE 120 OHM, SPPEED LO */
> + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x00003050
> + >;
> + };
> +
> + pinctrl_uart2: uart2grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b099
> + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b099
> + >;
> + };
> +
> + pinctrl_uart3: uart3grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1
> + MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1
> + MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x1b0b1
> + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart4: uart4grp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
> + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
> + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
> + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart5: uart5grp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
> + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
> + MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x1b0b1
> + MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x1b0b1
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + /* CLK: 47k Pup SPD_LOW DSE 40Ohm SRE_FAST HYS */
> + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x00017071
> + /* SD2: 47k Pup SPD_LOW DSE 80Ohm SRE_FAST HYS */
> + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x00017059
> + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017059
> + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017059
> + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017059
> + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017059
> +
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b099 /* usdhc2 CD */
> + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0001b099 /* usdhc2 WP */
> + >;
> + };
> +
> + pinctrl_usbotg: usbotggrp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x0001b0b0
> + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x00017059
> + MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x0001b099
> + >;
> + };
> +
> + pinctrl_wdog1: wdog1grp {
> + fsl,pins = <
> + /* Watchdog out */
> + MX6QDL_PAD_SD1_DAT2__WDOG1_B 0x0000b099
> + >;
> + };
> +};
> diff --git a/arch/arm/boot/dts/imx6qdl-mba6a.dtsi b/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
> new file mode 100644
> index 000000000000..a61f2705a340
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
> @@ -0,0 +1,36 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright 2013 Sascha Hauer, Pengutronix
> + *
> + * Copyright 2013-2021 TQ-Systems GmbH
> + * Author: Markus Niebel <Markus.Niebel@xxxxxxxxxxxx>
> + */
> +
> +/ {
> + aliases {
> + rtc0 = &rtc0;
> + };
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet>, <&pinctrl_enet_fix>;
> +};
> +
> +&i2c1 {
> + lm75: temperature-sensor@49 {
> + compatible = "national,lm75";
> + reg = <0x49>;
> + };
> +
> + m24c64_57: eeprom@57 {
> + compatible = "atmel,24c64";
> + reg = <0x57>;
> + pagesize = <32>;
> + };
> +
> + rtc0: rtc@68 {
> + compatible = "dallas,ds1339";
> + reg = <0x68>;
> + };
> +};
> diff --git a/arch/arm/boot/dts/imx6qdl-mba6b.dtsi b/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
> new file mode 100644
> index 000000000000..9f9f7037c9e4
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
> @@ -0,0 +1,52 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright 2013 Sascha Hauer, Pengutronix
> + *
> + * Copyright 2013-2021 TQ-Systems GmbH
> + * Author: Markus Niebel <Markus.Niebel@xxxxxxxxxxxx>
> + */
> +
> +/ {
> + aliases {
> + rtc0 = &rtc0;
> + };
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet>;
> +};
> +
> +&i2c1 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + status = "okay";
> +};
> +
> +&i2c3 {
> + lm75: temperature-sensor@49 {
> + compatible = "national,lm75";
> + reg = <0x49>;
> + };
> +
> + m24c64_57: eeprom@57 {
> + compatible = "atmel,24c64";
> + reg = <0x57>;
> + pagesize = <32>;
> + };
> +
> + rtc0: rtc@68 {
> + compatible = "dallas,ds1339";
> + reg = <0x68>;
> + };
> +};
> +
> +&iomuxc {
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
> + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
> + >;
> + };
> +};
> diff --git a/arch/arm/boot/dts/imx6qp-mba6b.dts b/arch/arm/boot/dts/imx6qp-mba6b.dts
> new file mode 100644
> index 000000000000..eee2e09d6e94
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6qp-mba6b.dts
> @@ -0,0 +1,18 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright 2015-2021 TQ-Systems GmbH
> + * Author: Markus Niebel <Markus.Niebel@xxxxxxxxxxxx>
> + */
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include "imx6qp-tqma6b.dtsi"
> +#include "imx6qdl-mba6.dtsi"
> +#include "imx6qdl-mba6b.dtsi"
> +#include "imx6q-mba6.dtsi"
> +
> +/ {
> + model = "TQ TQMa6QP on MBa6x";
> + compatible = "tq,imx6qp-mba6x-b", "tq,mba6b",
> + "tq,imx6qp-tqma6qp-b", "fsl,imx6qp";
> +};
> --
> 2.17.1
>
