Add base DTS file for pm8008 with chip and ldo nodes.
Signed-off-by: Satya Priya <quic_c_skakit@xxxxxxxxxxx>
---
Changes in V4:
- This is newly added in V4, to add all the pm8008 common stuff.
arch/arm64/boot/dts/qcom/pm8008.dtsi | 57 ++++++++++++++++++++++++++++++++++++
1 file changed, 57 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/pm8008.dtsi
diff --git a/arch/arm64/boot/dts/qcom/pm8008.dtsi b/arch/arm64/boot/dts/qcom/pm8008.dtsi
new file mode 100644
index 0000000..e23478c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8008.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2021, The Linux Foundation. All rights reserved.
+
+pm8008_chip: pm8008@8 {
+ compatible = "qcom,pm8008";
+ reg = <0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+};
+
+pm8008_ldo: pm8008@9 {
+ compatible = "qcom,pm8008";
+ reg = <0x9>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8008_regulators: regulators {
+ compatible = "qcom,pm8008-regulators";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8008_l1: l1@4000 {
+ reg = <0x4000>;
+ regulator-name = "pm8008_l1";
+ };
+
+ pm8008_l2: l2@4100 {
+ reg = <0x4100>;
+ regulator-name = "pm8008_l2";
+ };
+
+ pm8008_l3: l3@4200 {
+ reg = <0x4200>;
+ regulator-name = "pm8008_l3";
+ };
+
+ pm8008_l4: l4@4300 {
+ reg = <0x4300>;
+ regulator-name = "pm8008_l4";
+ };
+
+ pm8008_l5: l5@4400 {
+ reg = <0x4400>;
+ regulator-name = "pm8008_l5";
+ };
+
+ pm8008_l6: l6@4500 {
+ reg = <0x4500>;
+ regulator-name = "pm8008_l6";
+ };
+
+ pm8008_l7: l7@4600 {
+ reg = <0x4600>;
+ regulator-name = "pm8008_l7";
+ };
+ };
+};
--
2.7.4
