Add pm8008-regulator node and example.
Signed-off-by: Satya Priya <quic_c_skakit@xxxxxxxxxxx>
Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
Changes in V2:
- As per Rob's comments changed "pm8008[a-z]?-regulator" to
"^pm8008[a-z]?-regulators".
Changes in V3:
- Fixed bot errors.
- As per stephen's comments, changed "^pm8008[a-z]?-regulators$" to
"regulators".
Changes in V4:
- Changed compatible string to "qcom,pm8008-regulators"
.../devicetree/bindings/mfd/qcom,pm8008.yaml | 24 ++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
index ec3138c..ab6166d 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
@@ -44,6 +44,10 @@ properties:
"#size-cells":
const: 0
+ regulators:
+ type: object
+ $ref: "../regulator/qcom,pm8008-regulator.yaml#"
+
patternProperties:
"^gpio@[0-9a-f]+$":
type: object
@@ -122,6 +126,26 @@ examples:
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ regulators {
+ compatible = "qcom,pm8008-regulators";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_l1_l2-supply = <&vreg_s8b_1p2>;
+ vdd_l3_l4-supply = <&vreg_s1b_1p8>;
+ vdd_l5-supply = <&vreg_bob>;
+ vdd_l6-supply = <&vreg_bob>;
+ vdd_l7-supply = <&vreg_bob>;
+
+ pm8008_l1: l1@4000 {
+ reg = <0x4000>;
+ regulator-name = "pm8008_l1";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-min-dropout-voltage-microvolt = <96000>;
+ };
+ };
};
};
--
2.7.4
