Re: [PATCH v17 7/7] usb: Specify dependencies on USB_XHCI_PLATFORM with 'depends on'

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 16, 2021 at 09:21:44PM -0500, Alan Stern wrote:
> On Tue, Nov 16, 2021 at 12:07:39PM -0800, Matthias Kaehlcke wrote:
> > Some USB controller drivers that depend on the xhci-plat driver
> > specify this dependency using 'select' in Kconfig. This is not
> > recommended for symbols that have other dependencies as it may
> > lead to invalid configurations. Use 'depends on' to specify the
> > dependency instead of 'select'.
> > 
> > For dwc3 specify the dependency on USB_XHCI_PLATFORM in
> > USB_DWC3_HOST and USB_DWC3_DUAL_ROLE. Also adjust the
> > dependencies of USB_DWC3_CORE to make sure that at least one
> > of USB_DWC3_HOST, USB_DWC3_GADGET or USB_DWC3_DUAL_ROLE can be
> > selected.
> > 
> > Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> > Reviewed-by: Roger Quadros <rogerq@xxxxxxxxxx>
> > Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> > ---
> > 
> > Changes in v17:
> > - removed explicit dependency on USB from USB_DWC3
> > - added 'Reviewed-by' tags from Roger and Doug
> > 
> > Changes in v16:
> > - none
> > 
> > Changes in v15:
> > - adjusted dependencies of USB_DWC3_CORE to make sure it can only
> >   be enabled when at least one of USB_DWC3_HOST, USB_DWC3_GADGET
> >   or USB_DWC3_DUAL_ROLE is selectable
> > - updated commit message
> > 
> > Changes in v14:
> > - none
> > 
> > Changes in v13:
> > - patch added to the series
> 
> > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> > index d1d926f8f9c2..e5e612f143a1 100644
> > --- a/drivers/usb/host/Kconfig
> > +++ b/drivers/usb/host/Kconfig
> > @@ -80,7 +80,7 @@ config USB_XHCI_MTK
> >  
> >  config USB_XHCI_MVEBU
> >  	tristate "xHCI support for Marvell Armada 375/38x/37xx"
> > -	select USB_XHCI_PLATFORM
> > +	depends on USB_XHCI_PLATFORM
> >  	depends on HAS_IOMEM
> >  	depends on ARCH_MVEBU || COMPILE_TEST
> >  	help
> > @@ -112,9 +112,9 @@ config USB_EHCI_BRCMSTB
> >  config USB_BRCMSTB
> >  	tristate "Broadcom STB USB support"
> >  	depends on (ARCH_BRCMSTB && PHY_BRCM_USB) || COMPILE_TEST
> > +	depends on !USB_XHCI_HCD || USB_XHCI_PLATFORM
> >  	select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
> >  	select USB_EHCI_BRCMSTB if USB_EHCI_HCD
> > -	select USB_XHCI_PLATFORM if USB_XHCI_HCD
> >  	help
> >  	  Enables support for XHCI, EHCI and OHCI host controllers
> >  	  found in Broadcom STB SoC's.
> 
> It should be pointed out that this now requires people with xHCI systems 
> to actively turn on CONFIG_USB_XHCI_PLATFORM before they can enable 
> CONFIG_USB_BRCMSTB.  Before, that was not necessary.  Some users might 
> get confused and not realize what is needed.  Perhaps something should 
> be added to the "help" text.

I agree that the change could cause confusion, I'm not sure though if
adding something to the "help" text is a good mitigation. Users won't see
the text unless they can select the option, which requires
CONFIG_USB_XHCI_PLATFORM to be enabled. Also the dependencies are specified
nearby (and displayed), so it seems similar to a code comment on something
that the code evidently does (e.g. "initialize foobar with 0").

On a different note: I'm considering to break the CONFIG_USB_XHCI_PLATFORM
related patches out of the onboard_usb_hub series, since the driver
doesn't any longer depend on xhci_plat. In that sense I'm also open
to abandon those patches, if they aren't considered an improvement on
their own.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux