Re: [PATCH 3/3] arm64: dts: mediatek: Add USB xHCI controller for mt8195

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 02/11/2021 07:00, Chunfeng Yun wrote:
Add all four USB xHCI controllers for MT8195

Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>

Patch lookes good, I'll take it as soon as 1/3 and 2/3 is accepted.

Regards,
Matthias

---
  arch/arm64/boot/dts/mediatek/mt8195.dtsi | 79 ++++++++++++++++++++++++
  1 file changed, 79 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index a59c0e9d1fc2..263eebfd2ea1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -8,6 +8,7 @@
  #include <dt-bindings/clock/mt8195-clk.h>
  #include <dt-bindings/interrupt-controller/arm-gic.h>
  #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
  #include <dt-bindings/power/mt8195-power.h>
/ {
@@ -823,6 +824,26 @@
  			status = "disabled";
  		};
+ xhci0: usb@11200000 {
+			compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x11200000 0 0x1000>, <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>,
+				 <&topckgen CLK_TOP_SSUSB_REF>,
+				 <&apmixedsys CLK_APMIXED_USB1PLL>;
+			clock-names = "sys_ck", "xhci_ck", "ref_ck", "mcu_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 103>;
+			wakeup-source;
+			status = "disabled";
+		};
+
  		mmc0: mmc@11230000 {
  			compatible = "mediatek,mt8195-mmc", "mediatek,mt8192-mmc";
  			reg = <0 0x11230000 0 0x10000>,
@@ -843,6 +864,64 @@
  			status = "disabled";
  		};
+ xhci1: usb@11290000 {
+			compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x11290000 0 0x1000>, <0 0x11293e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port1 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_1P>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI_1P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_1P_BUS>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_1P_XHCI>,
+				 <&topckgen CLK_TOP_SSUSB_P1_REF>,
+				 <&apmixedsys CLK_APMIXED_USB1PLL>;
+			clock-names = "sys_ck", "xhci_ck", "ref_ck", "mcu_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 104>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		xhci2: usb@112a0000 {
+			compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x112a0000 0 0x1000>, <0 0x112a3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port2 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_2P>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI_2P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>,
+				 <&topckgen CLK_TOP_SSUSB_P2_REF>;
+			clock-names = "sys_ck", "xhci_ck", "ref_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 105>;
+			status = "disabled";
+		};
+
+		xhci3: usb@112b0000 {
+			compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x112b0000 0 0x1000>, <0 0x112b3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port3 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_3P>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI_3P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>,
+				 <&topckgen CLK_TOP_SSUSB_P3_REF>;
+			clock-names = "sys_ck", "xhci_ck", "ref_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 106>;
+			wakeup-source;
+			usb2-lpm-disable;
+			status = "disabled";
+		};
+
  		nor_flash: nor@1132c000 {
  			compatible = "mediatek,mt8195-nor", "mediatek,mt8173-nor";
  			reg = <0 0x1132c000 0 0x1000>;




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux