The thermal sensor bindings were not matched correctly against the expected naming scheme. r8a77980.dtsi also used a different naming scheme compared to the other related platforms. This series cleans up the dtsi files for the CPU target thermal sensors, allowing the validation to run. Enabling this validation shows up a new validation failure: linux/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dt.yaml: thermal-zones: sensor3-thermal:cooling-maps:map0:contribution:0:0: 1024 is greater than the maximum of 100 From schema: Documentation/devicetree/bindings/thermal/thermal-zones.yaml This validation error appears to be pervasive across all of these bindings, but changing that will be more invasive and require someone to perform dedicated testing with the thermal drivers to ensure that the updates to the ranges do not cause unexpected side effects. Kieran Bingham (9): arm64: dts: renesas: r8a774a1: Fix thermal bindings arm64: dts: renesas: r8a774b1: Fix thermal bindings arm64: dts: renesas: r8a774e1: Fix thermal bindings arm64: dts: renesas: r8a77951: Fix thermal bindings arm64: dts: renesas: r8a77960: Fix thermal bindings arm64: dts: renesas: r8a77961: Fix thermal bindings arm64: dts: renesas: r8a77965: Fix thermal bindings arm64: dts: renesas: r8a77980: Fix thermal bindings arm64: dts: renesas: r8a779a0: Fix thermal bindings arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 6 +++--- arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 6 +++--- arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 6 +++--- arch/arm64/boot/dts/renesas/r8a77951.dtsi | 6 +++--- arch/arm64/boot/dts/renesas/r8a77960.dtsi | 6 +++--- arch/arm64/boot/dts/renesas/r8a77961.dtsi | 6 +++--- arch/arm64/boot/dts/renesas/r8a77965.dtsi | 6 +++--- arch/arm64/boot/dts/renesas/r8a77980.dtsi | 4 ++-- arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 10 +++++----- 9 files changed, 28 insertions(+), 28 deletions(-) -- 2.30.2
