From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx> Hello all, This series is for appliying below fix to all Aspped LPC sub drivers. https://lore.kernel.org/all/20201208091748.1920-1-wangzhiqiang.bj@xxxxxxxxxxxxx/ An LPC sub driver can be enabled without using the lpc-ctrl driver or it can be registered ahead of lpc-ctrl depends on each system configuration and this difference introduces that LPC can be enabled without heart beating of LCLK so it causes improper handling on host interrupts when the host sends interrupts in that time frame. Then kernel eventually forcibly disables the interrupt with dumping stack and printing a 'nobody cared this irq' message out. To prevent this issue, all LPC sub drivers should enable LCLK individually so this patch adds clock control logic into the remaining Aspeed LPC sub drivers. Please review this series. Thanks, Jae Changes sinve v1: - Added 'clocks' property into ibt and kcs-bmc bindings using 'aspeed,ast2400-ibt-bmc.txt' and 'aspeed,ast2400-kcs-bmc.yaml' respectively because these are not merged into 'aspeed-lpc.yaml' yet. The bindings merging could be done using a separate patch later. Jae Hyun Yoo (6): ARM: dts: aspeed: add LCLK setting into LPC IBT node dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property ipmi: bt: add clock control logic ARM: dts: aspeed: add LCLK setting into LPC KCS nodes dt-bindings: ipmi: aspeed,kcs-bmc: add 'clocks' as a required property ipmi: kcs_bmc_aspeed: add clock control logic .../bindings/ipmi/aspeed,ast2400-ibt-bmc.txt | 2 ++ .../bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml | 7 +++++ arch/arm/boot/dts/aspeed-g4.dtsi | 1 + arch/arm/boot/dts/aspeed-g5.dtsi | 5 +++ arch/arm/boot/dts/aspeed-g6.dtsi | 5 +++ drivers/char/ipmi/bt-bmc.c | 24 +++++++++++++- drivers/char/ipmi/kcs_bmc_aspeed.c | 31 ++++++++++++++++--- 7 files changed, 70 insertions(+), 5 deletions(-) -- 2.25.1
