Some boards need to set the INn_MODE[1:0] register to change the input signal patch. This wlf,inmode property is optional. If present, values must be specified less than or equal to the number of input singals. If values less than the number of input signals, elements that has not been specifed are set to 0 by default. Example: - wlf,inmode = <2 0 2>; /* IN1, IN3 use DMIC */ Signed-off-by: Inha Song <ideal.song@xxxxxxxxxxx> --- drivers/mfd/arizona-core.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index 10a0cb9..81e6db8 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -534,7 +534,7 @@ EXPORT_SYMBOL_GPL(arizona_of_get_named_gpio); static int arizona_of_get_core_pdata(struct arizona *arizona) { struct arizona_pdata *pdata = &arizona->pdata; - int ret, i; + int ret, i, proplen; pdata->reset = arizona_of_get_named_gpio(arizona, "wlf,reset", true); @@ -560,6 +560,12 @@ static int arizona_of_get_core_pdata(struct arizona *arizona) ret); } + proplen = of_property_count_u32_elems(arizona->dev->of_node, + "wlf,inmode"); + if (proplen > 0 && proplen <= ARRAY_SIZE(arizona->pdata.inmode)) + of_property_read_u32_array(arizona->dev->of_node, "wlf,inmode", + arizona->pdata.inmode, proplen); + return 0; } -- 2.0.0.390.gcb682f8 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html