This series includes the patches to add the following features:
- Add basic support for new UniPhier NX1 SoC to USB3 and PCIe PHY.
NX1 SoC also has the same kinds of controls as the other UniPhier SoCs.
- Add a PHY parameters to PCIe PHY
- Add dual-phy support for the SoCs that has two phys to PCIe PHY
- Add basic support for Pro4 SoC to ACHI PHY
---
Changes since v2:
- Fix order of clock-names and reset-names in dt-bindings
- Add minItems to clocks in dt-bindings
- Add Acked-by: lines
Changes since v1:
- Fix indentation of clocks and resets in AHCI PHY binding documentation
- Fix insufficient argument issue when adding dual-phy to PCIe PHY
Kunihiko Hayashi (8):
dt-bindings: phy: uniphier-usb3: Add bindings for NX1 SoC
phy: uniphier-usb3: Add compatible string for NX1 SoC
dt-bindings: phy: uniphier-pcie: Add bindings for NX1 SoC
phy: uniphier-pcie: Add compatible string and SoC-dependent data for
NX1 SoC
phy: uniphier-pcie: Set VCOPLL clamp mode in PHY register
phy: uniphier-pcie: Add dual-phy support for NX1 SoC
dt-bindings: phy: uniphier-ahci: Add bindings for Pro4 SoC
phy: uniphier-ahci: Add support for Pro4 SoC
.../bindings/phy/socionext,uniphier-ahci-phy.yaml | 21 ++-
.../bindings/phy/socionext,uniphier-pcie-phy.yaml | 1 +
.../phy/socionext,uniphier-usb3hs-phy.yaml | 1 +
.../phy/socionext,uniphier-usb3ss-phy.yaml | 1 +
drivers/phy/socionext/Kconfig | 2 +-
drivers/phy/socionext/phy-uniphier-ahci.c | 201 ++++++++++++++++++++-
drivers/phy/socionext/phy-uniphier-pcie.c | 70 +++++--
drivers/phy/socionext/phy-uniphier-usb3hs.c | 4 +
drivers/phy/socionext/phy-uniphier-usb3ss.c | 4 +
9 files changed, 283 insertions(+), 22 deletions(-)
--
2.7.4
