Re: [PATCH v5 1/6] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Oct 25, 2021 at 6:24 PM Rob Herring <robh@xxxxxxxxxx> wrote:
>
> On Fri, Oct 22, 2021 at 10:06:54AM -0400, Jim Quinlan wrote:
> > Similar to the regulator bindings found in "rockchip-pcie-host.txt", this
> > allows optional regulators to be attached and controlled by the PCIe RC
> > driver.  That being said, this driver searches in the DT subnode (the EP
> > node, eg pci@0,0) for the regulator property.
> >
> > The use of a regulator property in the pcie EP subnode such as
> > "vpcie12v-supply" depends on a pending pullreq to the pci-bus.yaml
> > file at
> >
> > https://github.com/devicetree-org/dt-schema/pull/54
> >
> > Signed-off-by: Jim Quinlan <jim2101024@xxxxxxxxx>
> > ---
> >  .../bindings/pci/brcm,stb-pcie.yaml           | 23 +++++++++++++++++++
> >  1 file changed, 23 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > index b9589a0daa5c..fec13e4f6eda 100644
> > --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > @@ -154,5 +154,28 @@ examples:
> >                                   <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
> >                      brcm,enable-ssc;
> >                      brcm,scb-sizes =  <0x0000000080000000 0x0000000080000000>;
> > +
> > +                    /* PCIe bridge */
>
> More specifically, the root port.
>
> > +                    pci@0,0 {
> > +                            #address-cells = <3>;
> > +                            #size-cells = <2>;
> > +                            reg = <0x0 0x0 0x0 0x0 0x0>;
> > +                            device_type = "pci";
> > +                            ranges;
> > +
> > +                            /* PCIe endpoint */
> > +                            pci@0,0 {
> > +                                    device_type = "pci";
>
> This means this device is a PCI bridge which wouldn't typically be the
> endpoint. Is that intended?
Hi Rob,

I'm not sure I understand what you are saying --  do you want the
innermost node to be named something like ep-pci@0,0, and its
containing node pci-bridge@0,0?   Or, more likely, I'm missing the
point.  If my DT subtree is this

pcie@8b10000 {
    compatible = "brcm,bcm7278-pcie";
    ....
    pci-bridge@0,0 {
        reg = <0x0 0x0 0x0 0x0 0x0>; /* bus 0 */
        .....
        pci-ep@0,0,0 {
            reg = <0x10000 0x0 0x0 0x0 0x0>;  /* bus 1 */
            vpcie3v3-supply = <&vreg8>;
            ...
        }
    }
}

then the of_nodes appear to align correctly with the devices:

$ cd /sys/devices/platform/
$ cat 8b10000.pcie/of_node/name
pcie
$ cat 8b10000.pcie/pci0000:00/0000:00:00.0/of_node
pci-bridge
$ cat 8b10000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/of_node/name
pci-ep

and the EP device works of course.  I've even printed out the
device_node structure in the EP driver's probe and it is as expected.
I've noticed that examples such as
"arch/arm64/boot/dts/nvidia/tegra186.dtsi" have the EP node (eg
pci@1,0) directly under the
host bridge DT node (pcie@10003000).  I did try doing that, but the EP
device's probe is given a NUL device_node pointer.

I don't think it matters but our PCIe controllers only have a single root port.

Please advise,
Jim

>
> > +                                    assigned-addresses = <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>;
> > +                                    reg = <0x0 0x0 0x0 0x0 0x0>;
> > +                                    compatible = "pci14e4,1688";
> > +                                    vpcie3v3-supply = <&vreg7>;
> > +
> > +                                    #address-cells = <3>;
> > +                                    #size-cells = <2>;
> > +
> > +                                    ranges;
> > +                            };
> > +                    };
> >              };
> >      };
> > --
> > 2.17.1
> >
> >



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux